hammer coral dying

  • Thread starter Thread starter Zxknight
  • Start date Start date
  • Tagged users Tagged users None

Zxknight

New Member
View Badges
Joined
May 24, 2017
Messages
20
Reaction score
3
What state or country do you live in
New York
Rating - 0%
0   0   0
ust want to know is my hammer coral dying? it looks like the arms are deflating. any advice
IMG_6919.JPG
IMG_6920.JPG
 
How long have you had the coral? Maybe try moving it to a different place. I would also test the water and post your info here
 
A good sign is that the polyps are still extended. Doesn't look like it's dying, just contracted a little. Should be fine as long as your water is good and flow is not too high. How long have you had it?
 
i had it for about 3 weeks, i also moved it to a diffrent spot this morning.
phosphate .0
ph 8.4
no2 .0
no3 .0
salinity 1.024
temp 77.6
alk testing tomorrow
ca testing tomorrow
 
You numbers are okay with the exception of nitrates. 5ppm is a good level to aim for. It could be starving. They can handle higher nitrates near 10 to 20 ppm but if you have SPS corals as well, then I would aim for 5 ppm. Hopefully your alkalinity and calcium are in check.
 
You numbers are okay with the exception of nitrates. 5ppm is a good level to aim for. It could be starving. They can handle higher nitrates near 10 to 20 ppm but if you have SPS corals as well, then I would aim for 5 ppm. Hopefully your alkalinity and calcium are in check.
how do i go about increasing my nitrates?
 
There are several ways. My advice would be to feed a little more (target feed) about 2 - 3 times a week and see if that helps. I have a bunch of euphyllias in my tank but my nitrates are about 15ppm, which is more than I would like it to be in theory because I have plenty of SPS as well. It's a struggle either way but you're on the good side of things. They like a mature tank and moderate light and flow. Target feeding just might help.
 
Increasing nitrates too much is more likely to result in problems rather than fix them. That being said, every aquarium is different. Personally I wouldn't try to raise nitrate higher than 1-2ppm. I keep hammers and torches in several tanks with 2ppm nitrate and they thrive. It's still adjusting to your tank and probably just needs some time. What test kits are you using? Absolutely no phosphates and nitrates can be bad for coral in general, assuming you have a pretty accurate means of measurement.
 
There are several ways. My advice would be to feed a little more (target feed) about 2 - 3 times a week and see if that helps. I have a bunch of euphyllias in my tank but my nitrates are about 15ppm, which is more than I would like it to be in theory because I have plenty of SPS as well. It's a struggle either way but you're on the good side of things. They like a mature tank and moderate light and flow. Target feeding just might help.
thanks for the advive
 

IF YOU HAD TO OPERATE EVERYTHING ELSE MANUALLY, WHICH AUTOMATED SYSTEM WOULD YOU KEEP?

  • Auto top-off

    Votes: 56 57.7%
  • Automated dosing

    Votes: 6 6.2%
  • Mechanical filtration / roller filter

    Votes: 4 4.1%
  • Automated water testing

    Votes: 3 3.1%
  • Automatic feeding

    Votes: 1 1.0%
  • Lighting schedule

    Votes: 18 18.6%
  • Controller and remote monitoring

    Votes: 4 4.1%
  • Leak detection and emergency shutoff

    Votes: 1 1.0%
  • Automatic water changes

    Votes: 3 3.1%
  • None. I prefer to operate everything manually

    Votes: 0 0.0%
  • Something else (explain in the comments)

    Votes: 1 1.0%
Free Phyto Promo
Spend $39+ → free 16oz Phyto · Use code FREEPHYTO at checkout · $16.99 value · Densest 6-species blend · Free shipping on every order · 100% live arrival guaranteed Spend $39+ → free 16oz Phyto · Use code FREEPHYTO at checkout · $16.99 value · Densest 6-species blend · Free shipping on every order · 100% live arrival guaranteed
Shop Now Code: FREEPHYTO
Back
Top
Home
Post thread…
Market
What's new