Heaters

Jake Watson

New Member
View Badges
Joined
Jul 6, 2018
Messages
11
Reaction score
39
Rating - 0%
0   0   0
I'm working on getting all the equipment I want before I set up my tank and I just bought a neptune apex and I'm wondering what the best combo of heaters to run with the apex on my 125 gallon?
 

Skep18

Valuable Member
View Badges
Joined
Feb 3, 2018
Messages
1,229
Reaction score
948
Location
Southeast US
Rating - 100%
1   0   0
Idk that any specific units benefit the most from the Apex.

I have Jagers FWIW.
 

tiggs

Active Member
View Badges
Joined
Apr 8, 2012
Messages
445
Reaction score
678
Location
Cherry Hill, NJ
Rating - 0%
0   0   0
Personally, I'm a big fan of Finnex titanium heaters. There's no glass to break, some of them have a separate temp sensor that's not built-into the heating unit, and the three-pronged plug versions also act as a grounding probe.

I use mine with my Apex in a somewhat atypical fashion. Lots of times, folks turn their heater temp all the way up and use the Apex temp probe to determine when the heater outlet gets power and managing it this way. For my setup, I set the temp on my heater for my target tank temp (78) and only use the Apex temp sensor to kill power to the heater outlet if it goes above or below a certain temperature. This way, I have some redundancy and it would take both my heater and my Apex temp sensor to both go bad for it to nuke my tank.
 
OP
OP
J

Jake Watson

New Member
View Badges
Joined
Jul 6, 2018
Messages
11
Reaction score
39
Rating - 0%
0   0   0
I want to get two heaters with dissimilar technology but I don't want to break the bank if I don't have to. I haven't used a controller yet so idk what I should get.
 

Dr. Reef

www.drreefsquarantinedfish.com
View Badges
Joined
Jan 22, 2013
Messages
4,311
Reaction score
7,529
Location
Tulsa, OK
Rating - 100%
5   0   0
Finnex and viaaqua both make good reliable cheaper end titanium heaters.
Just because we know heaters generally fail in on position backing them up with your apex is a good idea and break total wattage down into smaller many heaters is best.
So instead of 1 x 300w heater I would do 2 or 3 x 75-100w heaters.
 

TOP 10 Trending Threads

HOW DO YOU ADJUST YOUR CUC AS ALGAE DISAPPEARS?

  • Capture and re-home CUC

    Votes: 7 6.7%
  • Increase white light/hours in tank to spur algae growth to feed CUC

    Votes: 6 5.7%
  • Feed nori to support CUC

    Votes: 36 34.3%
  • Feed herbivore pellets to support CUC

    Votes: 36 34.3%
  • Allow attrition to balance CUC and algae

    Votes: 45 42.9%
  • Provide macro algae to feed CUC

    Votes: 6 5.7%
  • Introduce CUC predators

    Votes: 1 1.0%
  • Other (please explain)

    Votes: 11 10.5%
Back
Top