Help with DIY led

[Aussie paul]

Thank you icecool2 and synodontis for your help i wasn't to clear on how many leds each driver can handle and the manufacturer of the board is not very helpful. Everything is a bit clearer now thanks

 

[TheEngineer]

Good luck!

 

[Bradw18]

Your light going on a 120? Were you ordering your boards from? Iv been getting mine off eBay and it looks like crap having the drivers on the floor like I do. Here's the prototype I came up with. It's 20 blues 40 20k and 10 5 watt 20ks I had planned on 3 of these over a 120

 

[Bradw18]

P.s m not in Australia but I do work 3rds lol

 

[Synodontis]

Hey Paul,

These are the boards I have. They have the sockets soldered to the board for the LDD's so down the road you can just unplug the 1000 LDD & replace with any other. From memory they are about 100mm square. Send me your address & I'll send a couple up for you :)

 

[Aussie paul]

Hey Paul,

These are the boards I have. They have the sockets soldered to the board for the LDD's so down the road you can just unplug the 1000 LDD & replace with any other. From memory they are about 100mm square. Send me your address & I'll send a couple up for you :)

How much do you want for them mate

 

[Synodontis]

Reckon I can cop it Paul lol :)
Price of the boards & postage wouldn't be much.
Call it our contribution to your build lol

 

[Aussie paul]

Thanks mate i can't thank you enough