High PH 8.5 advice needed.

  • Thread starter Thread starter Tdoan
  • Start date Start date
  • Tagged users Tagged users None

Tdoan

Active Member
View Badges
Joined
Apr 12, 2020
Messages
100
Reaction score
49
What state or country do you live in
Kentucky
Rating - 0%
0   0   0
My PH is running 8.3 to 8.5, it is a new setup for frags it has been running around 2 months. I am not running a skimmer at this point. It has around 20 frags and some are small colonies.
I am doing weekly water changes around 15%, this has kept my DKH around 9.6. I am not currently dosing anything at this point. But I will before long because my DKh is dropping from 9.6 to 8.2 in a weeks time. I am planning to use kalkwasser. I know this will elevate my ph, what should I do to lower and keep my ph at a safe level.
414FD734-4501-43DB-856B-8A9D46290795.png
 
I suspect the pH is not that high. High pH is very unlikely without high pH additives.

But if it is really hitting 8.5 already, I would not use kalkwasser. I'd use baking soda for alk.

Also, more aeration will reduce the pH.
 
I suspect the pH is not that high. High pH is very unlikely without high pH additives.

But if it is really hitting 8.5 already, I would not use kalkwasser. I'd use baking soda for alk.

Also, more aeration will reduce the pH.
I have added a air stone to the sump. I think I have some packages to re calibrate the probe.
 
I suspect the pH is not that high. High pH is very unlikely without high pH additives.

But if it is really hitting 8.5 already, I would not use kalkwasser. I'd use baking soda for alk.

Also, more aeration will reduce the pH.
When you say baking soda, is this the same as what is bought at the store. If so how would I dose it.
thanks
 
When you say baking soda, is this the same as what is bought at the store. If so how would I dose it.
thanks

Yes, normal Arm & Hammer baking soda from a grocery store.

Long term, you'll want a balanced alk and calcium dosing method of some sort, but for immediate use, use the calculator below to determine the amount of baking soda needed, dissolve it in Ro/DI, and add to a high flow area away from organisms.

http://reef.diesyst.com/chemcalc/chem_calc3.html
If you make this recipe, you can use the calculator above for dosing:

http://reefkeeping.com/issues/2006-02/rhf/index.php
Recipe #2, Part 2: The Alkalinity Part

Dissolve 297 grams of baking soda (about 1 1/8 cups) in enough water to make 1 gallon total. This dissolution may require a fair amount of mixing. Warming it speeds dissolution. This solution will contain about 950 meq/L of alkalinity (2660 dKH). As mentioned earlier, Arm & Hammer is a fine brand of baking soda to use in these recipes. Be sure to NOT use baking powder. Baking powder is a different material that often has phosphate as a main ingredient.
 
Yes, normal Arm & Hammer baking soda from a grocery store.

Long term, you'll want a balanced alk and calcium dosing method of some sort, but for immediate use, use the calculator below to determine the amount of baking soda needed, dissolve it in Ro/DI, and add to a high flow area away from organisms.

http://reef.diesyst.com/chemcalc/chem_calc3.html
If you make this recipe, you can use the calculator a for dosing:

http://reefkeeping.com/issues/2006-02/rhf/index.php
Recipe #2, Part 2: The Alkalinity Part

Dissolve 297 grams of baking soda (about 1 1/8 cups) in enough water to make 1 gallon total. This dissolution may require a fair amount of mixing. Warming it speeds dissolution. This solution will contain about 950 meq/L of alkalinity (2660 dKH). As mentioned earlier, Arm & Hammer is a fine brand of baking soda to use in these recipes. Be sure to NOT use baking powder. Baking powder is a different material that often has phosphate as a main ingredient.
Thanks for the explanation, I plan on recalibrating the probe and hope that solves the issue.
 
So I re calibrated the ph probe and I am back down to 8.1.
 

Attachments

  • A31A8A51-2F1B-4DE8-BC72-E802F72BFCA8.jpeg
    A31A8A51-2F1B-4DE8-BC72-E802F72BFCA8.jpeg
    243.1 KB · Views: 46

TOP 10 Trending Threads

WHAT DO YOU ALWAYS RUN OUT OF AT THE WORST TIME?

  • Salt mix

    Votes: 17 18.5%
  • Fish or coral food

    Votes: 5 5.4%
  • Test kits or reagents

    Votes: 10 10.9%
  • Filter media or replacement fleece

    Votes: 5 5.4%
  • RO/DI filters or supplies

    Votes: 14 15.2%
  • Fragging and repair supplies, like glue or epoxy

    Votes: 10 10.9%
  • I keep a backup of everything

    Votes: 24 26.1%
  • Other (Post in the comments)

    Votes: 7 7.6%
Back
Top
Home
Post thread…
Market
What's new