I’m in a pickle need some advice

mothergoose22

Community Member
View Badges
Joined
Jan 24, 2025
Messages
89
Reaction score
50
Location
smith river
What state or country do you live in
California
Rating - 0%
0   0   0
I have currently purchased a used CADE s2 1200 and in the excitement I made a rookie mistake of not checking the seams. Turns out they are failing.

My current options are to try to rebuild the Cade myself. Which I am not feeling confident about. I don’t know if I would ever truly trust the tank

Or I get a custom tank made that fits the Cade stand. The stand seems to be well made and the dimensions of the tank would be 46x27x whatever height I decide.

Or scrap the whole thing and start over with a new tank and stand.

Anyone have any thoughts? I’m just trying to make the best out of a stupid purchase.

Thanks
 
I’ve looked and can’t find anyone close enough to make it worth it. Water box quoted me 3200 shipped for euro braced tank.
 
Ok if that’s the route you want to take. That said, what condition is the stand in? I’d check it with a fine tooth comb seeing as the tank was crap the stand may be as well. If that’s the case just shoot for all new.
 
Good point. I have looked at the stand and it seems pretty stout. It’s aluminum construction and seems like it’s in good shape. By the looks of it. I think the previous owner got a little carried away with a razor while cleaning is why the silicone is separating.
 
Or I get a custom tank made that fits the Cade stand. The stand seems to be well made and the dimensions of the tank would be 46x27x whatever height I decide.

I’ve looked and can’t find anyone close enough to make it worth it. Water box quoted me 3200 shipped for euro braced tank.
Seems like scrapping the stand might be worth it just so you aren't pinned to those dimensions – a 48x24x? glasscages tank can be had starting at around $700.

Maybe build a new stand from scratch and don't look back?

(Custtom 47x27x? from GC starts around $1100 depending how you want it spec'd too, BTW. $3k with stand....way less for metal.)

You started off looking for used – was that to keep price of entry below a certain point, or other reasons?
 
Good point. I have looked at the stand and it seems pretty stout. It’s aluminum construction and seems like it’s in good shape. By the looks of it. I think the previous owner got a little carried away with a razor while cleaning is why the silicone is separating.
Well, can you post a picture of the areas in question?

The majority of the strength of these seams is at the silicone that is between the two panes of glass. The extra that is not sandwiched between the glass provides minimal service, is easily "damaged" by scraping, but its not that important in the integrity of glass & silicone aquariums.

Have you filled it outside and observed water leaking? If not, that is another route of investigation often used to evaluate the condition and integrity of an aquarium. You may not have a real problem if this damage is only cosmetic?
 
I’ll have to check out glass cages.

Yes I went used to try and stay in a certain budget. Unfortunately it’s now going to cost more in the end.
 
I did fill with water and it didn’t leak. However the seams at the top are half gone for a few inches. I contacted the seller and he seemed to think it wasn’t an issue and it has been that way for a while but I can’t trust it.
 

Attachments

  • IMG_6616.jpeg
    IMG_6616.jpeg
    118.1 KB · Views: 37
Probably one of the best images of an injured silicone seal that I have had the pleasure of looking at on!

I can see why you are concerned, and I don't have any ability to change your prespective or insure that my opinion that this seal is going to hold water for the next 10-25 years is valid, its certainly been damaged, probably with a glass scraping razor a previous algae cleaning careless person.

Resealing is a challenge that could be done but it's a lot of effort that I have done before but wouldn't encourage anyone else to do. It's easy enough to work with silicone but getting a pretty finish can be a bigger challenge than having the resealed tank hold water.

I hope you find a good way to move forward and get to reefing in confidence that the tank isn't going to fail. I have used acrylic tanks for years because even though they scratch fairly easy the seams don't usually have these kinds of risks.
 

TOP 10 Trending Threads

HOW WOULD YOU FEEL ABOUT RECEIVING A FISH OR CORAL AS A HOLIDAY GIFT?

  • I’d love one, as long as it’s a species I chose

    Votes: 25 24.8%
  • I’d trust someone who knows my tank to choose

    Votes: 9 8.9%
  • I’d rather get a gift card and pick it myself

    Votes: 41 40.6%
  • I’d prefer gear or supplies instead

    Votes: 2 2.0%
  • Please don’t surprise me with livestock

    Votes: 24 23.8%
  • Other (Post in the comments)

    Votes: 0 0.0%
Back
Top
Home
Post thread…
Market
What's new