I work only 5min a day

[Coone]

Hi,

Can’t seem to find how to get this working.

So I want that when a certain pump get’s actived (gets power on it’s socket), another socket also gets power for only the first 5minutes and then gets no power anymore while the first socket stil gets power

Short:
Socket 1 gets power and @ same time socket 2 gets power
After 5min socket 2 loses power while socket 1 continues

 

[wiszmaster]

What triggers the socket(s) to get power in first place?

 

[wiszmaster]

Let's say the following:

Timer5 is what triggers the ON/OFF state that you desire.
Socket 1 = Device on full time of timer
Socket2 = Device on for first 5 minutes of Timer duration.

--------------------------

1. Set your timer.
2. Go to Programmable Logic, and choose an available gate. Say G12

Input: Timer 5
Time: 300 (seconds)
Change Function to PULSE​

3. Go to your Switch Channels and Outlets section, and program both​

S1: Timer 5
S2: Programmable Logic 12
​

SAVE. Done.

 

[Coone]

What triggers the socket(s) to get power in first place?

ATO with 2 level sensors

 

[wiszmaster]

Programmable Logic: - Adjust the ATO Circuit to whichever one you're using.

Socket #1:

Socket #2: