ICP/RODI ASSISTANCE

  • Thread starter Thread starter Tigerito
  • Start date Start date
  • Tagged users Tagged users None

Tigerito

Active Member
View Badges
Joined
Jul 21, 2023
Messages
131
Reaction score
61
Location
herriman
What state or country do you live in
Utah
Rating - 0%
0   0   0
Hello,

I have a mature 134 Gallon sps Dominate tank and noticed my Phos climbing slightly and also hadn't done a ICP test in a while so sent 1 in. My ICP is showing Phospherus in my RODI water which is strange because I have a 7 stage overkill and I also make sure I always have 0 TDS leaving the system. I'm wondering what I can do to prevent this. Going to order another icp to double check.

I also have always shown high pottasium on every icp I have done in 5 months and was curious if they was a concern. I showed it while using redsea salt and now with using tropic marine. I don't dose any potassium.

Screenshot_20240604_104053_Samsung Internet.jpg
 
Hello,

I have a mature 134 Gallon sps Dominate tank and noticed my Phos climbing slightly and also hadn't done a ICP test in a while so sent 1 in. My ICP is showing Phospherus in my RODI water which is strange because I have a 7 stage overkill and I also make sure I always have 0 TDS leaving the system. I'm wondering what I can do to prevent this. Going to order another icp to double check.

I also have always shown high pottasium on every icp I have done in 5 months and was curious if they was a concern. I showed it while using redsea salt and now with using tropic marine. I don't dose any potassium.

Screenshot_20240604_104053_Samsung Internet.jpg
The vendor measures phosphorous and calculates the amount of phosphate this could be. Your results are actually showing no more than 0.004 ppm PO4. That is, multiplying the P measurement by 3 and dividing by 1000. Also, since the ICP vendor is not guaranteeing accuracy of there results for phosphorous, it can be an iffy measurement, there really isn’t an issue here,
 
The vendor measures phosphorous and calculates the amount of phosphate this could be. Your results are actually showing no more than 0.004 ppm PO4. That is, multiplying the P measurement by 3 and dividing by 1000. Also, since the ICP vendor is not guaranteeing accuracy of there results for phosphorous, it can be an iffy measurement, there really isn’t an issue here,
Right I use Phosphate tester from hanna and show nothing close to this. And there also showing this [picture] for phosphate and nitrate which doesn't make since and is WAY off from what I am getting
 

Attachments

  • Screenshot_20240604_130739_Samsung Internet.jpg
    Screenshot_20240604_130739_Samsung Internet.jpg
    107.7 KB · Views: 52
The 1 ug/l in the ro/di is quite low and no concern. Their comment it is critically high is ludicrous.
 

TOP 10 Trending Threads

WHAT’S THE HARDEST PART OF REEFING TO EXPLAIN TO A NON-REEFER?

  • Why a tiny coral frag can cost that much

    Votes: 12 26.7%
  • Why I spend time testing and adjusting water

    Votes: 7 15.6%
  • Why the fish I want might not fit my tank

    Votes: 8 17.8%
  • Why I have buckets, tubing, and salt around the house

    Votes: 1 2.2%
  • Why corals are living animals, not decorations

    Votes: 13 28.9%
  • How much time and attention a reef takes

    Votes: 12 26.7%
  • The difference between freshwater and saltwater creatures

    Votes: 2 4.4%
  • I’ve stopped trying to explain

    Votes: 13 28.9%
  • Other (Post in the comments)

    Votes: 5 11.1%
Back
Top
Home
Post thread…
Market
What's new