Is this a good seal.

How hard is it to take apart and reassemble a tank.
I know it's easy to spend someone else's money, but if you don't have experience resealing tanks, my advice is still to abandon this one and look for something else. Lots of good used tanks for sale...
 
How hard is it to take apart and reassemble a tank.
the hard part is the silicone removal ....the ABSOLUTE removal of the old silicone. After you carefully scrape off what you can with a razor blade, you need to use PVC pipe cleaning solution to remove even the tiniest patch of silicone residue. If you leave the residue, that will be where your seam failure happens. It' take hours and hours to scrape off the old silicone.
 
the hard part is the silicone removal ....the ABSOLUTE removal of the old silicone. After you carefully scrape off what you can with a razor blade, you need to use PVC pipe cleaning solution to remove even the tiniest patch of silicone residue. If you leave the residue, that will be where your seam failure happens. It' take hours and hours to scrape off the old silicone.
Is it honestly worth the effort. Like I wanted this tank so my Oscar can grow up big and strong but would it just be a better idea to scrap it and get a new tank
 
sell it as a reptile tank, just get new 75, not worth the risk,imo...
 
Is it honestly worth the effort. Like I wanted this tank so my Oscar can grow up big and strong but would it just be a better idea to scrap it and get a new tank
No, honestly not worth the effort. Should be fairly easy to find a reasonably priced freshwater tank.
 
Is it honestly worth the effort. Like I wanted this tank so my Oscar can grow up big and strong but would it just be a better idea to scrap it and get a new tank

I agree with the others. Get a new tank.

Doesn't mean you need to scrap the old one though. Keep is and rebuild it. Then you will have 2 tanks!!
 
It is fairly straightforward, however, it is many many hours of cleaning off the old. I did the front panel on my Waterbox 20, and to make sure I got it all took over two hours until I was satisfied. I used a razor, but on the edges, had to use sandpaper. The resealing assembly, is cake, especially if you have ever put a model together.

How much is your time worth? Only you can answer. It did feel good to fix a tank and see that I was able to do it.
 
I agree with the others. Get a new tank.

Doesn't mean you need to scrap the old one though. Keep is and rebuild it. Then you will have 2 tanks!!
I actually got two of these tanks for free. I’ll take pictures of the other one to hear y’all’s opinion on that one.
 
I actually got two of these tanks for free. I’ll take pictures of the other one to hear y’all’s opinion on that one.
I think you got what you paid for unfortunately...
 
I think you got what you paid for unfortunately...
It was worth a shot. I think the stand was more valuable than the tank tbh. I’ll see if Aqueon sells a tank with the same dimensions.
 

Attachments

  • image.jpg
    image.jpg
    174.3 KB · Views: 92
a 90 has same footprint also
 

TOP 10 Trending Threads

WHICH TYPE OF MISTAKE TAUGHT YOU YOUR MOST EXPENSIVE REEFKEEPING LESSON?

  • Moving too quickly or adding too much at once

    Votes: 9 32.1%
  • Skipping—or shortening—quarantine or dipping

    Votes: 5 17.9%
  • Buying the wrong equipment the first time

    Votes: 4 14.3%
  • Ignoring maintenance, warning signs, or redundancy

    Votes: 9 32.1%
  • Chasing numbers or making too many changes

    Votes: 3 10.7%
  • Choosing incompatible fish, corals, or invertebrates

    Votes: 5 17.9%
  • Poor aquascaping or tank-design decisions

    Votes: 2 7.1%
  • Failing to research an animal’s needs

    Votes: 1 3.6%
  • Trusting bad advice

    Votes: 4 14.3%
  • Doing something on the tank when you should've gone to bed

    Votes: 5 17.9%
  • Something else—tell us below

    Votes: 4 14.3%
  • I’m still waiting for my first expensive lesson!

    Votes: 3 10.7%
Back
Top
Home
Post thread…
Market
What's new