Issues with my Apex Programming (Avast Plank)

[cdw79]

Trying to set one of my outlets on my apex control board to go on for 1 minute, three times a day, at 2:00 pm, 6:00 pm, and 10:00 pm. I used the OSC command to try to do this and thought I got it right, but the plank didn't start turning at 10 like it was supposed to. Any issues with the code below?

Fallback OFF
OSC 000:00/01:00/239:00 Then ON
If Time 22:01 to 13:59 Then OFF

 

[Matty Ice]

I’m still fairly new at this too but maybe:

Fallback OFF
OSC 780:00/001:00/239:00 Then ON
If Time 22:01 to 13:59 Then OFF

OSC timers in this example are

• 780:00 = 780 minutes from midnight until the first run
• 001:00 = one minute of actual run time
• 239:00 = 3 hours & 59 minute to delay until the next run

I took this example from:
Thread 'Neptune Apex Programming Tutorials, Part 2: Timers'
https://www.reef2reef.com/threads/neptune-apex-programming-tutorials-part-2-timers.614038/

 

[YOYOYOReefer]

I put mine on a Wi-Fi outlet and programmed the outlet off its app to run 4 times a day it was like 12 bucks.

 

[aaron186]

Fallback OFF
OSC 000:00/002:00/118:00 Then ON
If Time 20:01 to 07:59 Then OFF

That’s my code and it works perfectly. I’m feeding more than you though.

If it’s just the 10pm feeding maybe have it go off at 10:02 instead of 10:01 and see if that fixes it? Also double check you apex clock and make sure your times are correct and synced to your actual time zone