JBJ ATO need help

Xclusive Reef

Valuable Member
View Badges
Joined
Sep 26, 2016
Messages
1,591
Reaction score
848
What state or country do you live in
New York
Rating - 0%
0   0   0
ok soooo I have the JBJ ATO and it's driving me nuts. I am trying to set it up where it has sensor 1 as primary and 2nd sensor is backup ii case 1st fails. I have removed the pin and flipped the sensor.

Well the 2nd switch is doing nothing if the ato is running and i raise the 2nd float it will do nothing at all.

WHAT AM I MISSING????
 
sounds like a bad controller or bad float switches. do the lights toggle on and off.
 
sounds like a bad controller or bad float switches. do the lights toggle on and off.
not when they both connected. I tested both floats 1 and then 2 and each work but not together. and yes i have it on the correct setting mode B
 
not when they both connected. I tested both floats 1 and then 2 and each work but not together. and yes i have it on the correct setting mode B

sounds like a bad controller. i have used those many years ago and always hated them.
 
sounds like a bad controller. i have used those many years ago and always hated them.
dang wish i knew before i dropped 50 bucks on the avast pump..
 
had to refresh my memory a little on how this unit works. i don’t believe it’s possible to do what you want.
 
had to refresh my memory a little on how this unit works. i don’t believe it’s possible to do what you want.
There is a youtube video that shows how to set one as primary and the 2nd as a backup incase first float fails.

 
There is a youtube video that shows how to set one as primary and the 2nd as a backup incase first float fails.



that would be mode b i believe. you want to make sure you have the sensors in the proper place. float 1 has to be max and float 2 has to be min.
 
that would be mode b i believe. you want to make sure you have the sensors in the proper place. float 1 has to be max and float 2 has to be min.
thanks for the feedback bud I appreciate it. I have tried all ways possible on modes A/B and nothing
 

TOP 10 Trending Threads

WHAT DO YOU ALWAYS RUN OUT OF AT THE WORST TIME?

  • Salt mix

    Votes: 17 18.3%
  • Fish or coral food

    Votes: 5 5.4%
  • Test kits or reagents

    Votes: 10 10.8%
  • Filter media or replacement fleece

    Votes: 5 5.4%
  • RO/DI filters or supplies

    Votes: 14 15.1%
  • Fragging and repair supplies, like glue or epoxy

    Votes: 11 11.8%
  • I keep a backup of everything

    Votes: 24 25.8%
  • Other (Post in the comments)

    Votes: 7 7.5%
Back
Top
Home
Post thread…
Market
What's new