For any DIY'ers out there that are looking to continue with kalkwasser but are hitting evap limits or if you want to save piles of $$ over dosing two part or other more expensive alk/ca additives calcium hydroxide is amazingly cheap. This can also preclude the need for a calcium reactor in theory or be a good compliment to one as well. There's a growing number of us out there experimenting with dosing kalk slurry (an over saturated/suspenion of calcium hydroxide of 1-4% by weight) with concentrations of up to 24x over normal saturated kalkwasser. hit me up if you're interested, parts list is free and only requires 1 3d printed part. I am not selling anything here, the .stl file will be provided at zero cost as well. Total investment for this setup is less than $15.00
This unit helps with preventing localized precipitation and allows a larger range of options for setting this up with your current layout. I've successfully tested with dosing rates between 5ml/min to 20ml/min. It could work slower or faster, I just haven't taken it that far yet. This range should cover most applications however.
This unit helps with preventing localized precipitation and allows a larger range of options for setting this up with your current layout. I've successfully tested with dosing rates between 5ml/min to 20ml/min. It could work slower or faster, I just haven't taken it that far yet. This range should cover most applications however.