Kamoer Reef Master SPA - Release Info for US?

[alberto1999]

Order it on Ebay. This seller gets them directly from Kamoer and has them in the US. He just shipped mine legit. also included the E1 module at no cost for me so I could connect to the f4 loser

: https://www.ebay.com/itm/3566413873...uid=alO3Mx4MRMW&widget_ver=artemis&media=COPY

 

[alberto1999]

I meant to say f4 doser. Not loser

 

[QBall]

Order it on Ebay. This seller gets them directly from Kamoer and has them in the US. He just shipped mine legit. also included the E1 module at no cost for me so I could connect to the f4 loser

: https://www.ebay.com/itm/3566413873...uid=alO3Mx4MRMW&widget_ver=artemis&media=COPY

Sweet, thanks. I have the KamoerQijaian so this would be a great addition but will have to wait until I have the funds. For now I will have to continue manual with my Hannas. Oh what about availability of reagents in the US for this?

 

[alberto1999]

Also on eBay for like $100.

 

[don.chaneaux]

Also on eBay for like $100.

Kindly, please provide some feedback on your experience after running it for a while. Thanks!

 

[alberto1999]

So far set up was easy. and the testing has been very accurate. I am happy and will update in a month. Its also sleek almost like a medical device feel

 

[tmccaff]

I wouldn’t get it until officially released in USA. Most likely though won’t be released here because coralvue focus is on maven release.

 

[michael23]

Kindly, please provide some feedback on your experience after running it for a while. Thanks!

i also interest on it, however after read most of the review of users at china, feed back is negative, will not accurate after using a while and some of their tank need to be reset up after traumatic happened. Do wait until the unit is more stable. it still ongoing fine tune stage according to china/taiwan users

 

[Robert Minett]

I wouldn’t get it until officially released in USA. Most likely though won’t be released here because coralvue focus is on maven release.

 

[Robert Minett]

Not going to be officially released in US. If you want one, you either go the eBay route (I messaged the person and never heard back) or you contact the manufacturer directly.

 

[alberto1999]

I’ve been running my unit for 7 months. Kamoer is launching to the US market in October under KamoerUSA.com

I saw the site which they shared with me and very impressive. Keep an eye out for launch but I’m sure it’ll be know rapidly within the community once available.

 

[alberto1999]

For those asking for an update—I’ve been running the Reef Master SPA since January, so about 9 months now

Maintenance & Error Codes.

The first few months were smooth sailing. Around month 3, I got my first “tube blockage” error. The app not only displayed the error but also pulled up a short troubleshooting video. Fixing it was simple—open the unit and swap the tubing. You can clean the tube, but honestly, it’s easier to just replace it. On average, I get one of these blockages about every 45 days on the saltwater line. Takes 5 minutes to fix.





At month 6, I had a “low light path vessel” warning. Again, the app walked me through it with a video. Basically, the reaction vessel can get a little dirty over time. I popped off 4 screws, cleaned it with a Q-tip, and it was back to normal. I’ve since ordered spare vessels ($5 each) so I can just swap them instead of cleaning.





Reliability


So far: 3 tube blockages + 1 vessel clean in 9 months. That’s it. No bad readings, no need for a technician. This is a huge difference from what I expected (especially compared to Trident). The SPA really is designed for user-level maintenance.





Accuracy & Auto Balance


Testing has been consistent and accurate throughout. After months of manually dosing KH on a set schedule, I hooked the SPA up to my doser and enabled the “auto balance” feature. It’s been running that way for about 2 months now—daily tests, automatic adjustments—and I’m very impressed with the results.



Overall Take


Minimal upkeep, cheap consumables, accurate testing, and the peace of mind that I’ll never have to ship it off to a tech. I’ve been pleasantly surprised.

The launch to all of KamoerUSA.com is end of October. Which will be there US inventory of product line, reagents and parts. As well as 24/7 chat support with a live technician

 

[don.chaneaux]

For those asking for an update—I’ve been running the Reef Master SPA since January, so about 9 months now

Maintenance & Error Codes.

The first few months were smooth sailing. Around month 3, I got my first “tube blockage” error. The app not only displayed the error but also pulled up a short troubleshooting video. Fixing it was simple—open the unit and swap the tubing. You can clean the tube, but honestly, it’s easier to just replace it. On average, I get one of these blockages about every 45 days on the saltwater line. Takes 5 minutes to fix.





At month 6, I had a “low light path vessel” warning. Again, the app walked me through it with a video. Basically, the reaction vessel can get a little dirty over time. I popped off 4 screws, cleaned it with a Q-tip, and it was back to normal. I’ve since ordered spare vessels ($5 each) so I can just swap them instead of cleaning.





Reliability


So far: 3 tube blockages + 1 vessel clean in 9 months. That’s it. No bad readings, no need for a technician. This is a huge difference from what I expected (especially compared to Trident). The SPA really is designed for user-level maintenance.





Accuracy & Auto Balance


Testing has been consistent and accurate throughout. After months of manually dosing KH on a set schedule, I hooked the SPA up to my doser and enabled the “auto balance” feature. It’s been running that way for about 2 months now—daily tests, automatic adjustments—and I’m very impressed with the results.



Overall Take


Minimal upkeep, cheap consumables, accurate testing, and the peace of mind that I’ll never have to ship it off to a tech. I’ve been pleasantly surprised.

The launch to all of KamoerUSA.com is end of October. Which will be there US inventory of product line, reagents and parts. As well as 24/7 chat support with a live technician

Thanks for the update and news! Reagents last about 3 months per refill?

 

[Robert Minett]

For those asking for an update—I’ve been running the Reef Master SPA since January, so about 9 months now

Maintenance & Error Codes.

The first few months were smooth sailing. Around month 3, I got my first “tube blockage” error. The app not only displayed the error but also pulled up a short troubleshooting video. Fixing it was simple—open the unit and swap the tubing. You can clean the tube, but honestly, it’s easier to just replace it. On average, I get one of these blockages about every 45 days on the saltwater line. Takes 5 minutes to fix.





At month 6, I had a “low light path vessel” warning. Again, the app walked me through it with a video. Basically, the reaction vessel can get a little dirty over time. I popped off 4 screws, cleaned it with a Q-tip, and it was back to normal. I’ve since ordered spare vessels ($5 each) so I can just swap them instead of cleaning.





Reliability


So far: 3 tube blockages + 1 vessel clean in 9 months. That’s it. No bad readings, no need for a technician. This is a huge difference from what I expected (especially compared to Trident). The SPA really is designed for user-level maintenance.





Accuracy & Auto Balance


Testing has been consistent and accurate throughout. After months of manually dosing KH on a set schedule, I hooked the SPA up to my doser and enabled the “auto balance” feature. It’s been running that way for about 2 months now—daily tests, automatic adjustments—and I’m very impressed with the results.



Overall Take


Minimal upkeep, cheap consumables, accurate testing, and the peace of mind that I’ll never have to ship it off to a tech. I’ve been pleasantly surprised.

The launch to all of KamoerUSA.com is end of October. Which will be there US inventory of product line, reagents and parts. As well as 24/7 chat support with a live technician

Your experience vs mine are complete opposite. I had issues from day 1 and continue to this day. Not as often since I've placed about 30 support tickets. It's honestly like I got a refurbished unit that was never checked by the factory.

The purchasing of extra vessels just because you dont want to take the couple minutes it takes to clean is stupid in my opinion. Maybe 1 extra to keep clean and swap them back and forth, but wasting money just to replace them every time is a waste.

Compressed air cleans the lines in 5 seconds, just disconnect from pinch valve and splitter and blow back into bottle or pouch.

 

[bschowa]

I’ve been running my unit for 7 months. Kamoer is launching to the US market in October under KamoerUSA.com

I saw the site which they shared with me and very impressive. Keep an eye out for launch but I’m sure it’ll be know rapidly within the community once available.

Any ideas on what reagent pricing will be without shipping across the sea? I am running 2 units currently and would love to get away from the customs on reagents since they expire about 6 months after buying it’s hard to “stock up” so you end up paying customs multiple times a year

 

[tmcca]

Coralvue was the supplier for Kamoer. I am guessing they dropped them because of Maven if that ever comes, lol. I heard week before easter they will be live. I like to see the cost, etc to buy from USA.