Large Frag Tank Repair Questions

  • Thread starter Thread starter Mester320
  • Start date Start date
  • Tagged users Tagged users None

Mester320

Well-Known Member
View Badges
Joined
Jul 13, 2013
Messages
609
Reaction score
168
Location
Saint Marys, PA
Rating - 0%
0   0   0
I recently purchased a 72Lx24Wx16H, basically a 220 cut in half, to use as a frag tank in the fish room I am building. It was not perfect but for $275 I figured it was worth the risk. Once home I realized that the bottom trim is cracked in multiple spots and when I pulled on one corner it broke apart. Wondering if anyone has a recommendation on what to do. Just order a new stock brace or is there a better solution?

Also I will be resealing the entire tank before using
20190715_204045.jpeg
20190718_183016.jpeg
20190718_183039.jpeg
20190718_183648.jpeg
20190718_183653.jpeg
 
Usually when there are cracks like that it means the tank was being stressed in one way or another. Sometimes is caused by excess weight on one part of the tank or an unlevel surface. It is not uncommon though, as I've seen many of these plastic braces break.

In either case, I'd pull it off and make sure all your glass is intact before you fill it. If you can find a new trim piece, I'd probably just do that. Unless you feel comfortable enough to leave it off!
 
It seems that the tank is pretty old. i am wondering where to get these replacements. also I wonder if I could leave the top brace off?
 
It seems that the tank is pretty old. i am wondering where to get these replacements. also I wonder if I could leave the top brace off?
It most likely is. My 250 is around 15 years old so I know how it is lol. Had to strip out all the silicone and reseal it!

But no, unfortunately you can't run it without a top brace. The tension on the glass without top support will cause the glass to bow and break. That's the only unfortunate thing about the plastic braces haha.

The bottom you might be able to get away with since all 4 sides are connected to the bottom glass. Personally, I wouldn't fully trust it without all the supports there though[emoji1303]
 
That tank looks like it's been through the proverbial wringer. Even a 15 year old, well cared for tank shouldn't have cracked trim. Also keep in mind that 're-sealing' is primarily an aesthetic effort. It will do nothing for any structural problems.
 

TOP 10 Trending Threads

WHAT DO YOU ALWAYS RUN OUT OF AT THE WORST TIME?

  • Salt mix

    Votes: 17 18.9%
  • Fish or coral food

    Votes: 5 5.6%
  • Test kits or reagents

    Votes: 9 10.0%
  • Filter media or replacement fleece

    Votes: 5 5.6%
  • RO/DI filters or supplies

    Votes: 14 15.6%
  • Fragging and repair supplies, like glue or epoxy

    Votes: 10 11.1%
  • I keep a backup of everything

    Votes: 23 25.6%
  • Other (Post in the comments)

    Votes: 7 7.8%
Back
Top
Home
Post thread…
Market
What's new