Leak Detection Alarm Help

[AustinReefer1]

I have an FMM with 2 standard leak detectors, 1 optical leak detector, and a level monitoring device. I’m getting alarms on the level monitoring but not the leak detectors.

I’ve confirmed that the detectors function using a wet paper towel. The switch goes to closed when wet but I’m not getting alarms through text or email. Any ideas? Here are some photos

Thanks for the help!

 

[Lbrdsoxfan]

More than likely the LLS (liquid level sensor) is toast, they have been failing a bit.

Try to calibrate it again, if it doesn't take may be kaput.

 

[AustinReefer1]

Thanks for the response. The level sensor works as intended. It’s the leak detectors that aren’t sending alarms.

I’m sure it’s something I’m coding wrong or didn’t set up properly. I’m new to controllers.

 

[AustinReefer1]

Bump for help

 

[n2585722]

Bump for help

It might help if you were to mention Apex in the title next time since not all controllers are Apex and you want Apex specific help.

 

[AustinReefer1]

Bump, I don’t know how to change title

 

[n2585722]

Bump, I don’t know how to change title

That is why I said next time to add the controller type in the title. I am not sure if the title can be changed once it has been entered. Unfortunately I would not be much help with Apex since I have never had one. I have had leak detectors hooked to the RKE, Archon and Hydros controllers.