If you read my thread, I mounted mine exactly 12" above the water surface and have good coverage on a 18" x 60" x 23" deep tank. You may need to go a little higher to get the same coverage depending on your tank dimensions.
LEDs?
- Thread starter bigcapct
- Start date
- Tagged users None
That shoud get you good coverage. I know with their leg kits the lights are only about 6" high so coverage is not very good which is why I kept my canopy and raised them higher.
nexusnight
Community Member
- Joined
- Jun 28, 2013
- Messages
- 30
- Reaction score
- 4
I run my hydras the oposite way mind u i went with four ove a six foot span. See if u can find a local metal shop that can slot some aluminum tube for you and suspend it from the ceiling. Ill post a pic tonight
Sent from my GT-I9100M using Tapatalk 2
Sent from my GT-I9100M using Tapatalk 2
nexusnight
Community Member
- Joined
- Jun 28, 2013
- Messages
- 30
- Reaction score
- 4
Its a 140 gallon. Still building the setup but the lights are set to go
Sent from my GT-I9100M using Tapatalk 2
Sent from my GT-I9100M using Tapatalk 2
nexusnight
Community Member
- Joined
- Jun 28, 2013
- Messages
- 30
- Reaction score
- 4
heres some pics!!!
nexusnight
Community Member
- Joined
- Jun 28, 2013
- Messages
- 30
- Reaction score
- 4
because your tank is 24 wide by 48 you may want to consider it. I feel youd get a nice spread mounting them in the same direction as mine and it allows for another unit to be added with minimal effort. just slide the others over and slide a new on in:wink:
Similar threads
