Lifegard bulkheads

Are Lifegard Sch40 bulkheads slightly bigger than other brands? Looking on their website they are saying 2.5" (63.5mm) hole size for their 1.5" bulkhead. I know BRS is saying 2-3/8" (60mm) for their bulkheads.
https://lifegardaquatics.com/collections/bulkhead-fittings
BRS Makes mistakes, and this is could be an error on their website by recommending the 60mm bit for the 1.5" ABS bulkhead. That seems like a really tight tolerance. The gasket size is 86mm/3.38" - I would use the 65mm bit.

To answer your question:
Diameter of Lifegard SlipxThread 1.5" bulkhead is 2.323" or 59.0042mm
Diameter of BRS 1.5" SlipxThread 1.5" bulkhead is 2.32" or 58.92mm

I would say down to the thousandth of an inch, they are for our purposes the same size.
 
BRS Makes mistakes, and this is could be an error on their website by recommending the 60mm bit for the 1.5" ABS bulkhead. That seems like a really tight tolerance. The gasket size is 86mm/3.38" - I would use the 65mm bit.

To answer your question:
Diameter of Lifegard SlipxThread 1.5" bulkhead is 2.323" or 59.0042mm
Diameter of BRS 1.5" SlipxThread 1.5" bulkhead is 2.32" or 58.92mm

I would say down to the thousandth of an inch, they are for our purposes the same size.
Thanks for the detailed response. I have used the 60mm drill bit in the past and it is a tight fit for sure.
 

TOP 10 Trending Threads

WHAT DO YOU ALWAYS RUN OUT OF AT THE WORST TIME?

  • Salt mix

    Votes: 17 18.5%
  • Fish or coral food

    Votes: 5 5.4%
  • Test kits or reagents

    Votes: 10 10.9%
  • Filter media or replacement fleece

    Votes: 5 5.4%
  • RO/DI filters or supplies

    Votes: 14 15.2%
  • Fragging and repair supplies, like glue or epoxy

    Votes: 10 10.9%
  • I keep a backup of everything

    Votes: 24 26.1%
  • Other (Post in the comments)

    Votes: 7 7.6%
Back
Top
Home
Post thread…
Market
What's new