Marinlab ICP results

Chris Yanez

New Member
View Badges
Joined
Apr 4, 2018
Messages
9
Reaction score
0
What state or country do you live in
United Kingdom
Rating - 0%
0   0   0
Hi all

First post here, joined the site due to more comprehensive chat regarding ICP test results and I wondered if a few of you would pass your eye over my test results. I am a little confused as to the source of some of these results but by all accounts I am not alone.

I run Red Sea 4 part additives, a calcium reactor and NoPox (relatively recently changed from a nitrate reactor). I am from the UK so a slightly different market.

Results Marinlab.jpg


Any comments appreciated.

Chris
 

Attachments

Oh I am aware that phosphates are high, these are coming down nicely and now at 0.06 and dropping.
 
I don’t see anything particularly troubling. Some trace elements such as iron are pretty high, probably due to dosing, but not likely high enough to be a problem.
 
Thanks both. Yeah I have already cut back on the iron dosing. The Zinc I will investigate, thanks for the link.
 
What about the Ba?

I wouldn't worry about that level of barium, which is not especially unusual. Barium is not especially toxic. I suspect it just mostly just gets into calcium carbonate and related minerals in place of some calcium, just like strontium does.

There is a series of similar chemicals of increasing diameter, from magnesium to calcium to strontium to barium. The barium is so low in concentration to these others that I don't see a problem.
 
So the only zinc that I need to keep an eye on. I think I read an article by you Randy that refers to methods of removing heavy metals by an appropriate refugium. I have just purchased a Kessil H380 to light my fuge as the previous light was doing nothing. I can visibly see the growth in days with this new light. Question is, do you feel this may help reduce the heavy metals?

Chris
 
So the only zinc that I need to keep an eye on. I think I read an article by you Randy that refers to methods of removing heavy metals by an appropriate refugium. I have just purchased a Kessil H380 to light my fuge as the previous light was doing nothing. I can visibly see the growth in days with this new light. Question is, do you feel this may help reduce the heavy metals?

Chris


There are some medias that remove some heavy metals.. Poly-filters,
Seachem Laboratories CupriSorb and Two little fishies MetaSorb UHC.
 
There are some medias that remove some heavy metals.. Poly-filters,
Seachem Laboratories CupriSorb and Two little fishies MetaSorb UHC.

Brill will loot into them. I also hear Triton AL99? Likely hood of them raising AL?
 
Brill will loot into them. I also hear Triton AL99? Likely hood of them raising AL?

None of them are minerals (so no aluminum), except Al99, which I do not know if it binds zinc and wouldn't use it for that purpose.
 
This is the first time I heard of Al99 is that just like phosguard but pellets??

I'm not sure what shapes the particles are, but yes, it is aluminum oxide. :)
 

TOP 10 Trending Threads

WHAT KIND OF REEFING DEAL ARE YOU HOPING TO PICK UP THIS BLACK FRIDAY?

  • A whole new aquarium or complete system

    Votes: 5 15.2%
  • Lighting, pumps, or other major equipment

    Votes: 4 12.1%
  • Controllers, testing, dosing, or automation gear

    Votes: 4 12.1%
  • Dry goods and restocks, like salt, media, or food

    Votes: 4 12.1%
  • Corals! Must...Have...CORALS!!!

    Votes: 8 24.2%
  • Fish or other livestock

    Votes: 1 3.0%
  • Rock, sand, or other aquascaping supplies

    Votes: 1 3.0%
  • I’m browsing, but don’t have a specific target

    Votes: 4 12.1%
  • I’m not shopping for reef deals this year

    Votes: 2 6.1%
  • Other (Post in the comments)

    Votes: 1 3.0%
Back
Top
Home
Post thread…
Market
What's new