Micro bubbles

jodilea95

New Member
View Badges
Joined
Jul 11, 2025
Messages
16
Reaction score
21
Location
Huntsville
Rating - 0%
0   0   0
I’m new to the hobby, I just moved my filter now I’m dealing with major micro bubbles. What can I do to fix this problem, will this hurt the clowns? I was just able to add fish yesterday after my cycle was officially complete.
Skimmer is built into filter it does not have an individual switch for skimmer only
Filter was changed and the phosphate speciality pad as well with the 20% water change yesterday. The bubbles did not occur until I move the filter over a bit
Picture attached for reference

IMG_3205.jpeg
 
I’m new to the hobby, I just moved my filter now I’m dealing with major micro bubbles. What can I do to fix this problem, will this hurt the clowns? I was just able to add fish yesterday after my cycle was officially complete.
Skimmer is built into filter it does not have an individual switch for skimmer only
Filter was changed and the phosphate speciality pad as well with the 20% water change yesterday. The bubbles did not occur until I move the filter over a bit
Picture attached for reference

IMG_3205.jpeg
Check the water intake side of the filter to see if it’s sucking any air… otherwise, make sure the filter is sitting level on the tank rim, and check any skimmer adjustments!
 
Welcome to Reef2Reef!

No need to panic, the bubbles won't hurt your fish at all 🙂

Looks like you have a Hang On Back (HOB) filter, I bet the intake tube got a little out of position, and is pulling air. Make sure the intake tube is well seated, fully down in its place.

I hope that helps!
 
Welcome to Reef2Reef!

No need to panic, the bubbles won't hurt your fish at all 🙂

Looks like you have a Hang On Back (HOB) filter, I bet the intake tube got a little out of position, and is pulling air. Make sure the intake tube is well seated, fully down in its place.

I hope that helps!
I tried checking the intake tube it seems to be seated, fresh into it and it feels very defeating.
Thank you!! Glad to hear it won’t hurt the fish!!
 
I tried checking the intake tube it seems to be seated, fresh into it and it feels very defeating.
Thank you!! Glad to hear it won’t hurt the fish!!
What filter do you have there? Could the protein skimmer part of it be "leaking" bubbles?
 
How would I go about checking that?
I've never had that filter, so I don't know for sure, but many Hang On Back (HOB) filters will do this when any part is not seated just right. I would probably unplug it, and just try to make sure everything is where it's supposed to be. Maybe try pulling up the intake tube and then forcing it down again, it may not be sitting quite right.
 
Last edited:

TOP 10 Trending Threads

ARE YOU READY TO CONFESS TO CRAZIEST, DUMBEST, FUNNIEST THING YOU’VE EVER DONE IN REEFING?

  • Yeah, I'll confess! (Share your story in the comments!)

    Votes: 40 53.3%
  • Nah, I'll keep mine a secret...(Don't be like that, share with the class!)

    Votes: 35 46.7%
Back
Top
Home
Post thread…
Market
What's new