- Joined
- Jul 25, 2011
- Messages
- 1,194
- Reaction score
- 858
- Location
- Winter Park, FL
- What state or country do you live in
- Florida
New Display is finally coming into the house Friday. I’ve had this idea of combining multiple grain sizes of sand to help give it “structure” in areas of the tank for burrowing inhabitants and have some finer sand areas for wrasses.
The concept in my head: tank needs 150lbs of sand for 2” sand bed. Mix would be 30-40 lbs TBS live sand, 80-120 lbs of Ocean Direct reef grade, 40 lbs of Ocean Direct Oolite.
The TBS sand will get sifted (as it is added to the tank) to separate the fines and chunky stuff. Hoping this might help separate any larger pests that may possibly come in as well.
I will layer it as follows:
20 lbs (ish) of TBS sand ( fines) as the base mixed with 20 lbs of reef grade the 40 lbs of oolite. This will get concentrated to under the deeper parts of the aquascape.
Mix some of the TBS chunky stuff with some reef grade (10-40 mix) to line the perimeter of the aquascape, areas that I would think pistols and gobies may burrow. The remaining reef grade and TBS will fill the open sand areas.
Or just mix it all up? As im writing this, it’s seeming like a ton of work. Though I will still sift the TBS sand to hopefully catch any potential larger pests ( worms and crabs)
Will take the sump off line and only run powerheads in the display until the water is clear. I’ll run the manifold in the sump to keep some flow going through the cryptic sump.
What have you guys done?
The concept in my head: tank needs 150lbs of sand for 2” sand bed. Mix would be 30-40 lbs TBS live sand, 80-120 lbs of Ocean Direct reef grade, 40 lbs of Ocean Direct Oolite.
The TBS sand will get sifted (as it is added to the tank) to separate the fines and chunky stuff. Hoping this might help separate any larger pests that may possibly come in as well.
I will layer it as follows:
20 lbs (ish) of TBS sand ( fines) as the base mixed with 20 lbs of reef grade the 40 lbs of oolite. This will get concentrated to under the deeper parts of the aquascape.
Mix some of the TBS chunky stuff with some reef grade (10-40 mix) to line the perimeter of the aquascape, areas that I would think pistols and gobies may burrow. The remaining reef grade and TBS will fill the open sand areas.
Or just mix it all up? As im writing this, it’s seeming like a ton of work. Though I will still sift the TBS sand to hopefully catch any potential larger pests ( worms and crabs)
Will take the sump off line and only run powerheads in the display until the water is clear. I’ll run the manifold in the sump to keep some flow going through the cryptic sump.
What have you guys done?

