MN Aquariums reef

MNAquariums

Community Member
View Badges
Joined
Jun 16, 2026
Messages
61
Reaction score
70
Location
Sweden
What state or country do you live in
Other International
Rating - 0%
0   0   0
My 80 gal system (64gal display).

20260928_221320_88382E41-9AD9-457D-BDE9-ABD3C395605F.png
 
The lates project was 3D-printing a lightshroud to cover my ledbars. Took almost a week of printing and assembling but it turned out allright. Roughly used about 1,3 kg filament.



IMG_3396.JPG

IMG_3397.JPG

IMG_3403.JPG

IMG_3406.JPG

IMG_3413.JPG
 
Beautiful system, thank you for sharing!
 
It´s slow, but very nice to see how the colours develope as the corals are growing. Acropora Tortuosa Rainbow



DSC09367-Redigera.jpg
 
One issue has presented itself lately, and that is a clear trend of rising boron.

I run a hybrid balling solution that I have tailored myself, using additives from different brands—mainly for cost effectiveness, but also to adapt everything as closely as possible to my specific system.

Here are the boron ICP readings from 06‑17‑2026 and my latest from 08‑17‑2026.

Since the earlier one, I have slightly lowered my salinity and continued my regular 5% weekly water changes, but the trend is still clear. All other elements look fine and nothing raises major flags, but boron made me try to find the cause.

I suspect that using a modified Aquaforest balling method with mineral salt, combined with Fauna Marin Trace 1–3, is causing an overlap—particularly Trace 1, which contains potassium, strontium, boron, selenium, rubidium, vanadium and fluorine.

I have now significantly reduced the dose of Trace 1, performed a 10% water change and will do another 10% water change next week.

I will soon send in another ICP to check if boron has stabilized or if the level slowly drifts back down. This raises another question, of course: will there be a deficiency of the other elements in Trace 1? And if so, is it chemically reasonable to obtain these specific elements, make a blend in RO water and put it on a dosing pump to create a continuous, easier‑to‑manage trace solution?



boron 1.png

Boron 2.png
 
Very beautiful reef. How old is it? I am moving into more of a mixed reef in my 1 yr old 75g. I did not move my rbta however. I started with 1 and probably had 30 when I transferred from my 56g! 🤪
 
Very beautiful reef. How old is it? I am moving into more of a mixed reef in my 1 yr old 75g. I did not move my rbta however. I started with 1 and probably had 30 when I transferred from my 56g! 🤪
Thank you, has been running about 2 years, som corals transfered from a old one.
I noticed later that the BTA had actually split into 3 so will have to see where they end up. Slightly concerned about the acroporas 😅
 

TOP 10 Trending Threads

IF YOU WERE CHOOSING YOUR MAIN REEF TANK TODAY, WHAT SIZE WOULD YOU PICK COMPARED WITH YOUR CURRENT

  • Much smaller

    Votes: 1 2.8%
  • A little smaller

    Votes: 0 0.0%
  • About the same

    Votes: 1 2.8%
  • A little larger

    Votes: 13 36.1%
  • Much larger

    Votes: 12 33.3%
  • About the same volume, but different dimensions

    Votes: 4 11.1%
  • I’d keep this one and add a second tank

    Votes: 2 5.6%
  • I don’t have a reef tank yet

    Votes: 0 0.0%
  • Other (Post in the comments)

    Votes: 3 8.3%
Back
Top
Home
Post thread…
Market
What's new