My first DIY build thread 30" led fixture

  • Thread starter Thread starter twilliard
  • Start date Start date
  • Tagged users Tagged users None
Ok T5 lamps are so BORING! no shimmer, looks fake.
My LED rebuild better go quick!
I am debating.. 42" or the full 48" for the new heatsink?
 
Ok T5 lamps are so BORING! no shimmer, looks fake.
My LED rebuild better go quick!
I am debating.. 42" or the full 48" for the new heatsink?
How wide is the tank? You can get away from active cooling with a larger heatsink, if you actively cool now. On my 48" tank, I went with two 20" heatsinks. They were super beefy though, so I didn't need any cooling.
 
Its 48" tank. My 30" in this thread has DIY PWM temp controlled fans. Rebuild will have 3 fans.
I am only adding 15 more chips to the layout (70 total 350W can't remember if they were all 5w chips LOL) so the chips will be spread a little more through the new heatsink.
 
What heatsink? You might not need that much (or any) cooling, even at just 42".
 
More specifically:

Material (assuming aluminum)
Number of fins
Thickness of fins
Thickness of base plate
Length
Height
Width
 
How is the growth with the DIY light?
 
It will be the same heatsink I used for my 30" from makersLED
Just haven't decided on 42" or not.

I guess I should mention that this original thread was for over my 46G bowfront.
Now I have a 75G hence the rebuild of a longer fixture.
 
How is the growth with the DIY light?
Growth was slow, but I created that by not including 2 spectrums. (I have to go back and see the Nm I did not include)
The chips I did not include are $5.00 each LOL is why I didn't originally add them.
 
Growth was slow, but I created that by not including 2 spectrums. (I have to go back and see the Nm I did not include)
The chips I did not include are $5.00 each LOL is why I didn't originally add them.
you know the turtle always wins the race:rolleyes:
 
Good lord, disinfecting the chiller lines. I NEVER run it during the winter.
 
For me as you know LEDs are the only way to go.
T5's was the cheapest temporary lighting I could put together :( $65 for the fixture and $83 for the lamps
 

TOP 10 Trending Threads

WHEN NUISANCE ALGAE OR CYANO FIRST APPEARS, WHAT DO YOU DO FIRST?

  • Manually remove it and observe

    Votes: 1 6.3%
  • Retest nutrients and other parameters

    Votes: 2 12.5%
  • Adjust flow or lighting

    Votes: 0 0.0%
  • Reduce or change feeding

    Votes: 0 0.0%
  • Add or strengthen the cleanup crew

    Votes: 3 18.8%
  • Improve filtration or nutrient export

    Votes: 0 0.0%
  • Use a targeted treatment

    Votes: 0 0.0%
  • Wait and let the tank find its balance

    Votes: 7 43.8%
  • Phone a friend...

    Votes: 0 0.0%
  • It depends (explain in the comments)

    Votes: 3 18.8%
Back
Top
Home
Post thread…
Market
What's new