This is easier to look at on my open-source website. I am still having trouble with web development, so I have not had time to complete this manual, but what is there with a photo of system that has remained unchanged, so you can get you started. I can help guide you on questions that come up.
You might consider starting with blue stripe pipefish, very tiny larvae, ditch any rotifers if using, go to smaller nauplii species of copepods. Having a quick breeding, bred and butter species helps pay the way.
https://reeflifecreations.com/the-manual-punch-bowl-techniques/
Do you mind divulging the basics of breeding the copepods? The website doesn't say much about it.
The copepods I have used almost exclusively is Parvocalanous crassirostris 50 - 400 microns in size. The brown or golden algae grown almost exclusively was Isochrysis galbana. Both comes from tropical waters. The copepods is available by Reed Mariculture and must be requested. The algae can be ordered from Carolina Biological Supply. Both sources will let you start out with good sterile cultures. Most Aquaculture companies replace their culture frequently. I have been using same copepod culture for about five years.
Contaminated cultures happens easily. Subculturing often can keep cultures in a monoculture. The alternative is strict protocols and sterilized materials. I have avoided most of this by having many subcultures and when a culture is seen contaminated with a blue green algae, diatoms or other algae or some kind of bacteria. I just subculture the non contaminated cultures and add for culture disposed of. I use disposable food prep gloves when handling cultures. I also use new disposable containers and air line each time I notice any growth on inner sides.
Rotifers have such a rapid growth, will find their way into algae and copepod cultures, so I do not use rotifers at all.
Copepods have a slower growth rate and mainly feed on micro algae and dead and decaying organic matter. Understanding that, means you do not need to subculture daily, unless you are running at max of the cultures output.
There is a lot of information on culturing the two species of algae and copepod I use. So I would suggest you read the proper protocols that science has laid out.
Harvesting after sedimentation of culture is a method I use. I let cultures settle in gallon pitchers for half a day or more. You will see the copepods rise to surface and is simpler to screen off copepods to separate from nauplii from adults by micro screen sieves. I have started to use these 200 Mesh and 100 Mesh Filter 5 Inch Filters Nylon Sieve.
Fine Filter Screen is Used for Filtering Soybean Milk, Tea, Coffee, Honey Juice, Wine and Liquid Transfer Filtration.
The containers I have been using is 1.3 gallon collapsible water storage bags. I also use 3/16” airline to add minimal amount of air for circulation.
I will stop here and when you have the cultures to get started, we can go father on subculturing and harvesting to feed larvae.