Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
All the original stock equipment is in use. That is low? As far as I can tell that is the max fill mark that's labeled on the side of the tank.Are you using the sump in the back? Why is the water level so low?
Looks nice!
Hey,And... after last night's LED upgrade to - Steve's LEDs -
RED SEA MAX 250/C250 LED UPGRADE - PLUG AND PLAY
No, both are blowing out. One harder than the other.Hey,
I’m starting the same tank with those Same led lights. There hood lights! Tanks looking awesome. Hoping u could answer a question. Does your pump 2 suck water into the sump. If I put my hand against the pump 2 nozzle inside the tank that pump is sucking in. Unlike the return pump, pump 1 which is blowing out into the tank...
The RS max manual says to operate the over flow weir 2 cm down. Yours looks all the way down. You’ll have to add more water once you doAll the original stock equipment is in use. That is low? As far as I can tell that is the max fill mark that's labeled on the side of the tank.
The RS max manual says to operate the over flow weir 2 cm down. Yours looks all the way down. You’ll have to add more water once you do
Yup, water level is all the way up to the top now.With the lid open looking directly from the front of the tank, there is a slider on the backwall that should be moved up some. It will raise the water level in the tank and lower the water in the sump. You will need to add more saltwater to bring up the sump level back to where you have it in the pictures.