N-Clear fleece roller Tips & Tricks

[coralattics]

Looking for tips and recommendations of how to set the N-Clear fleece roller by Nature Dimension function best for IM Nuvo20! As of right now pretty much plug and play for me base on the instruction provided. Much appreciation if you can shared your thoughts and setting be truly helpful!
Thanks

 

[Rocks reef]

From the pics you posted, it appears to be working as it should. It will advance on its own when it senses the fleece is full/clogged.
Was there a specific question you had though? I was unable to discern it from your post if you did. If so, I apologize.

 

[coralattics]

From the pics you posted, it appears to be working as it should. It will advance on its own when it senses the fleece is full/clogged.
Was there a specific question you had though? I was unable to discern it from your post if you did. If so, I apologize.

Through the day, the alarm keeps on beeping, I have have to press the alarm button 3 times to turn it off! What’s the cause and how to fix it

 

[Tyrone]

I’m having the same problem.

 

[NatureDimensions Verified Sponsor]

Hi coralattics, the used fleece in your photos still looks fairly lightly loaded. Based on that, the first things we’d check are whether the sensor is too low or the tank’s overall water level is too high.

• Sensor height: Try raising the sensor so the fleece can become more thoroughly dirty before advancing—typically a consistent deep yellow to brown.
• Water level: Make sure the rear-chamber water level is within its normal operating range.
• Flow stability: Check whether other equipment or pump settings are causing the water level to fluctuate and repeatedly reach the sensor.

Our water-level and sensor adjustment guide walks through this.

If those checks don’t explain it and you’re still getting alarms, contact us at [email protected]. We’ll be happy to help check the setup and work through it with you.