Need some suggestions

dirty_south87

Active Member
View Badges
Joined
Dec 26, 2022
Messages
430
Reaction score
291
Location
North Carolina
What state or country do you live in
North Carolina
Rating - 0%
0   0   0
I’m currently using Red Sea coral pro salt mix, just found out that they may have changed their mix. I started on a new bucket roughly 2 weeks ago and ever since then I have been fighting the parameters in my tank. So what would be a good switch?
 
I’m currently using Red Sea coral pro salt mix, just found out that they may have changed their mix. I started on a new bucket roughly 2 weeks ago and ever since then I have been fighting the parameters in my tank. So what would be a good switch?
Which parameters and how? Have you tested the new water?
 
Which parameters and how? Have you tested the new water?
As of today on the Hanna checker ammonia is at 0.20ppm and nitrate is at 26ppm. I have checked both water source. My rodi needed a new filter (carbon block) and I even got rodi from lfs and checked it before mixing. I’ve done several water changes and added a few things. After water changes it seems to help for a bit and then right back up if not higher
 
I’m currently using Red Sea coral pro salt mix, just found out that they may have changed their mix. I started on a new bucket roughly 2 weeks ago and ever since then I have been fighting the parameters in my tank. So what would be a good switch?
Like @Jekyl said, hard to suggest anything without knowing your target params.
 
As of today on the Hanna checker ammonia is at 0.20ppm and nitrate is at 26ppm. I have checked both water source. My rodi needed a new filter (carbon block) and I even got rodi from lfs and checked it before mixing. I’ve done several water changes and added a few things. After water changes it seems to help for a bit and then right back up if not higher
Are these tests tank or freash salt water. If tank, test fresh salt water.
 
Test your next batch before putting in the tank. This would verify the red sea salt is the source.
 
Test your next batch before putting in the tank. This would verify the red sea salt is the source.
I will do that to be sure. In the mean time is there another good salt mix to use just incase it is the salt itself?
 
I will do that to be sure. In the mean time is there another good salt mix to use just incase it is the salt itself?
The dirty little secret is that any of the brand name salts all do the trick. Pick what is cheap, available and has the parameters that make sense. As for the ammonia and nitrate without a test of some freshly mixed salt water, I don't think it's a likely source.
 
The dirty little secret is that any of the brand name salts all do the trick. Pick what is cheap, available and has the parameters that make sense. As for the ammonia and nitrate without a test of some freshly mixed salt water, I don't think it's a likely source.
I’m gonna test the next batch I get going and see where it lands first. To me it’s just all weird since I started having the issues since I got the new bucket. Nothing has been added or removed (died) from the tank. I just can’t seem to find the source of it
 
Always best to check the variables first
 
I’m currently using Red Sea coral pro salt mix, just found out that they may have changed their mix. I started on a new bucket roughly 2 weeks ago and ever since then I have been fighting the parameters in my tank. So what would be a good switch?
Its a slight changed but if you are seeking something more stable-
Seachem Salinity
Tropic Marin Actif
Aquaforest salt
 
I still do not understand why you want to switch. I do not think any salt mix has enough ammonia or nitrate to be a reason to not use it.
 
Interesting.

I just happen to have picked up a box of Red Sea Blue this morning.
Didn't even notice it said new formula on the box.

Just for fun I'll mix up 5 gallons to 35ppt in the morning per their instructions and measure a few vitals and post them here.

Batch Number 1711220512 and I have their ICP in my inbox.
 
Interesting.

I just happen to have picked up a box of Red Sea Blue this morning.
Didn't even notice it said new formula on the box.

Just for fun I'll mix up 5 gallons to 35ppt in the morning per their instructions and measure a few vitals and post them here.

Batch Number 1711220512 and I have their ICP in my inbox.
Let me know how that goes please.
 
I still do not understand why you want to switch. I do not think any salt mix has enough ammonia or nitrate to be a reason to not use it.
I’m gonna make a small batch this afternoon and see what I get on test results before I make my final decision. I just know I had nothing but trouble since I started on this new bucket
 
I’m gonna make a small batch this afternoon and see what I get on test results before I make my final decision. I just know I had nothing but trouble since I started on this new bucket

What sort of trouble?
 
What sort of trouble?
Ammonia and nitrates going up and no matter what I do it’s not coming down. I’ve tried different water sources to mix with and it don’t matter. I done a 30% Sunday and the numbers were even higher.
 
Ammonia and nitrates going up and no matter what I do it’s not coming down. I’ve tried different water sources to mix with and it don’t matter. I done a 30% Sunday and the numbers were even higher.

That does not sound like a salt problem to me. What values are we talking about, and how long ago was the tank cycled?

Most salt mixes have a little ammonia, and that is no concern. Nitrite is not usually significant.
 

TOP 10 Trending Threads

WHAT DO YOU ALWAYS RUN OUT OF AT THE WORST TIME?

  • Salt mix

    Votes: 15 17.9%
  • Fish or coral food

    Votes: 5 6.0%
  • Test kits or reagents

    Votes: 8 9.5%
  • Filter media or replacement fleece

    Votes: 5 6.0%
  • RO/DI filters or supplies

    Votes: 13 15.5%
  • Fragging and repair supplies, like glue or epoxy

    Votes: 10 11.9%
  • I keep a backup of everything

    Votes: 21 25.0%
  • Other (Post in the comments)

    Votes: 7 8.3%
Back
Top
Home
Post thread…
Market
What's new