Can anyone tell me what is going on with my DOS? It is only programed to dose 2ml of all for reef over 24 hours but yet dosed over 1000ml on its own. This is the 2nd time this has happened and I am lost on why this keeps happening.
Neptune DOS problem
- Thread starter Abyzter
- Start date
- Tagged users None
Didn’t even think of that. It is not recommended to plug the DOS power in to the EB832
Reign1
Active Member
No what I believe he meant is if the channel for your DOS is set to on and not on auto meaning doser will just be on and not on the schedule you created.
Following along anyway
Last edited:
Gtinnel
10K Club member
Yes that is what I meant. I know it has a set dosing amount when turned to the on position, but I don’t remember what the set amount is.
It has nothing to do with the power for the dos.
Yours must work differently than mine. I can only control the power (Off-Auto-On) for things plugged directly in to the EB832. The DOS is not plugged in to that and can only be controlled with the clipboard menu.
Gtinnel
10K Club member
The tiles at the bottom of this screen shot is what I am referring to. It is where you turn the dosing heads to Off/Auto/On. It tells the head whether to not dose anything, follow the dosing table, or to continuously dose.
This is not the power for the dos, which isn’t plugged into my eb832.
ca1ore
10K Club member
Excellence Award
Reef Tank 365
CTARS Member
Article Contributor
R2R TV Featured
Looks like you must have programmed it wrong. That you want 2ml but it does 200 every hour at the same time suggests perhaps you slipped a decimal point?
Is the DOS capable of dispensing 1/10th of a ml at a time? That is a very small amount of liquid. Doesn't address the issue you're having but I don't thing there is much value in dividing up the dosage if you're only adding 2 ml. Just add it once per day and call it good.
Zinda
Community Member
@Abyzter did you ever figure this out? I had exactly the same problem and I'm 99% sure I was set to auto (but I freaked out and turned it off before I saw this post ...).
I programmed it like this:
The summary of both makes sense to me (Dos 416ml over 10 hours and Dose 83 ml over 2 hours):
But then when I wake up in the morning I see it has dosed 3.8L???
Also, I believe this wouldn't be due to it being left in ON position because the log says it was dosing 200 ml every 1/2 hour which I think is well below what it would do if it were just "ON", right?
I programmed it like this:
The summary of both makes sense to me (Dos 416ml over 10 hours and Dose 83 ml over 2 hours):
But then when I wake up in the morning I see it has dosed 3.8L???
Also, I believe this wouldn't be due to it being left in ON position because the log says it was dosing 200 ml every 1/2 hour which I think is well below what it would do if it were just "ON", right?
Js.Aqua.Project
Reef Addict
On your DOS schedule screen, what does it look like?
For example here is my channel for my carbon dosing:
It shows start time, end time, and how much to dose spread out over that time period.
For example here is my channel for my carbon dosing:
It shows start time, end time, and how much to dose spread out over that time period.
Zinda
Community Member
That's the first image I included aboveOn your DOS schedule screen, what does it look like?
On your DOS schedule screen, what does it look like?
For example here is my channel for my carbon dosing:
It shows start time, end time, and how much to dose spread out over that time period.
Zinda
Community Member
OK, now I'm suspicious. I ran a test where I just turned one side of the DOS pump "ON" (not auto), and it actually *does* dose at 200ml every 30 minutes....
So now I strongly suspect I did just have it "ON" and not "Auto"
So now I strongly suspect I did just have it "ON" and not "Auto"
I think you might be missing out on some functionality of your apex… are you aware you can add and customize your dashboard sliders and icons? You can certainly control the DOS from your dashboard regardless of it being plugged into the EB832.
vetteguy53081
Well known Member and monster tank lover
Partner Member 2024
Excellence Award
Reef Tank 365
RGB
Article Contributor
Tampa Bay Reef Keepers
West Palm Beach Reefer
Hospitality Award
Ocala Reef Club Member
305 Reef Club
Wisco Reefers
Midwest Reefer
Fish Medic
MAC of SW Florida
Rock Pool Reef Keepers
R2R Secret Santa 2023
My Tank Thread
My Aquarium Showcase
On fusion, there are tips and pointers in chapter 3-4-5-6
Are you letting your Trident measurements control your Dos amounts? I think if you have the Trident controlled dosing enabled, it could be dangerous if it's not dialed in 100% correctly. But even still, I'm thinking that is way more dosing than the Trident could or would effect.... Just a thought I guess...
Zinda
Community Member
No, I just had it set to a 500ml per night amount. I know have it automatically stop if the PH rises above 8.2 (duh, should have done that first). I really do think this was me just leaving it ON instead of Auto
Similar threads
- Price: $150
- Shipping Available
