Neptune Temp Probes off - even two new ones

[SaracensRugby]

So I found that my neptune temp probe was drifting, a ton. So I ordered a new probe. Connected it, and temp reads 65 degrees. Calibrated, still stuck at 65 degrees. BRS sent me a replacement probe, this one is stuck at 65 degrees as well, even with calibration. When I plug the old faulty probe it, it give me a closer to actual reading immediately. What am I doing wrong, or did I get two faulty new probes? Seems weird that they both default to 65 degrees. Thanks in advance.

 

[Kfactor]

So I found that my neptune temp probe was drifting, a ton. So I ordered a new probe. Connected it, and temp reads 65 degrees. Calibrated, still stuck at 65 degrees. BRS sent me a replacement probe, this one is stuck at 65 degrees as well, even with calibration. When I plug the old faulty probe it, it give me a closer to actual reading immediately. What am I doing wrong, or did I get two faulty new probes? Seems weird that they both default to 65 degrees. Thanks in advance.

i had the same problem even after reset i only use my hrdros one now and it seem to match up good

 

[dangles]

Set up a support session with Neptune. Their engineers are very helpful.