New 300w Viparspectra setting

Firepony

Community Member
View Badges
Joined
Jun 12, 2021
Messages
90
Reaction score
83
Location
Leesburg FL
Rating - 0%
0   0   0
Hello. I just got the 300w (31") Viparspectra light. My tank is 75 gallon (48" long 18" deep 18"wide) I plan on setting it 8" high above the tank. I have a 6 month old tank with LPS, SPS and soft corals. What are the settings I should start out with as not to stress or kill anyone Plus how often do I raise/change the settings until I get desired results. If I left out any needed info...I apologize.

16235092152995248814396569414487.jpg
 
Last edited:

Robert Binz

Well-Known Member
View Badges
Joined
May 3, 2019
Messages
532
Reaction score
303
Rating - 0%
0   0   0
Hello. I just got the 300w (31") Viparspectra light. My tank is 75 gallon (48" long 18" deep 18"wide) I plan on setting it 8" high above the tank. I have a 6 month old tank with LPS, SPS and soft corals. What are the settings I should start out with as not to stress or kill anyone Plus how often do I raise/change the settings until I get desired results. If I left out any needed info...I apologize.

16235092152995248814396569414487.jpg

8 inches is way too close UNLESS you do @telegraham ‘s mod (remove the lenses and put on a piece of acrylic to diffuse the LEDs)

before seeing the mod I hung mine @16 inches
 

Jekyl

GSP is the devil and clowns are bad pets
View Badges
Joined
Jan 15, 2019
Messages
11,271
Reaction score
15,489
Location
Michigan
Rating - 0%
0   0   0
12 inches above the tank. 20 white 60 blue is how I ran my black boxes
 

Robert Binz

Well-Known Member
View Badges
Joined
May 3, 2019
Messages
532
Reaction score
303
Rating - 0%
0   0   0
Hello. I just got the 300w (31") Viparspectra light. My tank is 75 gallon (48" long 18" deep 18"wide) I plan on setting it 8" high above the tank. I have a 6 month old tank with LPS, SPS and soft corals. What are the settings I should start out with as not to stress or kill anyone Plus how often do I raise/change the settings until I get desired results. If I left out any needed info...I apologize.

16235092152995248814396569414487.jpg

Also if it’s helpful to you there’s a BRS video comparing black box lights that gives their ideal heights. Just skip to the parts about the viparspectra
 
OP
OP
Firepony

Firepony

Community Member
View Badges
Joined
Jun 12, 2021
Messages
90
Reaction score
83
Location
Leesburg FL
Rating - 0%
0   0   0
I watch them all the time :) I'm going to put it 12 inches high. I just need to know what to set the controls to starting out and how often to bring it up a little at a time
 

diver22

Active Member
View Badges
Joined
Aug 9, 2016
Messages
275
Reaction score
99
Rating - 0%
0   0   0
Hi, I wanted to share in case someone had a similar tank like mines, I got a par meter today and adjusted my Vipraspectra 165W I have 3 over my tank, thank god I did.

Note the tank is only 18" wide and has two overflows so honestly in the rear corners I did not care much....

Tank Dimensions = 72" L X 18" W X 29" H.

I have 1 1/2" Sand bed.

Mount Height = 12"

Lights Adjustments = Whites 5% & Blues 90%

PAR Readings:

Screen Shot 2021-08-07 at 3.31.25 PM.png



Hope this helps, I was looking for something with the exact tank but did not find it...
 

outhouse

Valuable Member
View Badges
Joined
May 25, 2021
Messages
1,322
Reaction score
1,016
Location
Auburn ca
Rating - 0%
0   0   0
Biggest mistake is too much intensity. I followed similar advise as above and it cooked my coral at 60 %. On a 210g tank 30 inches deep....These lights are strong. At 8" high like mine, I'm running 6% B and 1 % W. And I'm getting tons of growth. At 60 I had no growth at all, and a slow decline over the years. People make the same mistake with kessels and complain about no growth, lights were way to bright.
 

diver22

Active Member
View Badges
Joined
Aug 9, 2016
Messages
275
Reaction score
99
Rating - 0%
0   0   0
Biggest mistake is too much intensity. I followed similar advise as above and it cooked my coral at 60 %. On a 210g tank 30 inches deep....These lights are strong. At 8" high like mine, I'm running 6% B and 1 % W. And I'm getting tons of growth. At 60 I had no growth at all, and a slow decline over the years. People make the same mistake with kessels and complain about no growth, lights were way to bright.
So you are running 6% Blue ?
 

outhouse

Valuable Member
View Badges
Joined
May 25, 2021
Messages
1,322
Reaction score
1,016
Location
Auburn ca
Rating - 0%
0   0   0
Yes 6% B. With less of a light, in a 30 inch deep tank. People don't realize corals can only absorb so much, so after 6 hours it is a waste. And par meters not accurate, and to much intensity worse then not enough. I grew coral professionally for a decade using 175w metal halides in my 210 for LPS. Remember you can always go brighter if your not getting results
 

LeftyReefer

2500 Club Member
View Badges
Joined
Jun 17, 2020
Messages
2,535
Reaction score
2,821
Location
Saginaw
Rating - 0%
0   0   0
I'm running my 300w viparspectra at 1% Whites and 20% blues. hung 13" over the water.
 

diver22

Active Member
View Badges
Joined
Aug 9, 2016
Messages
275
Reaction score
99
Rating - 0%
0   0   0
So many mix reviews...

This guy seems to be running high PAR levels running these lights and claims all is good...

 

DanTheReefer

Active Member
View Badges
Joined
Dec 2, 2019
Messages
482
Reaction score
494
Rating - 0%
0   0   0
Hello. I just got the 300w (31") Viparspectra light. My tank is 75 gallon (48" long 18" deep 18"wide) I plan on setting it 8" high above the tank. I have a 6 month old tank with LPS, SPS and soft corals. What are the settings I should start out with as not to stress or kill anyone Plus how often do I raise/change the settings until I get desired results. If I left out any needed info...I apologize.

16235092152995248814396569414487.jpg
Comments above are probably better for those with viparspectra experience. Also BRStv included that light (lower watt version) in their black box showdown YouTube video.

Your aquascape is pretty tall and narrow, so everything is going to be pretty close to the light. I’d run it really low. Keep wattages of major reef lights like LED Kessil A360X (90 watts), Neptune Sky (200 watts), XR30 (215 watts). Best bet is to measure the par with a par meter like the seneye or a rental. I was having issues keeping things alive the first 6 months or so, was about to add more lighting, then got the seneye and realized I was torching everything.
 

diver22

Active Member
View Badges
Joined
Aug 9, 2016
Messages
275
Reaction score
99
Rating - 0%
0   0   0
Comments above are probably better for those with viparspectra experience. Also BRStv included that light (lower watt version) in their black box showdown YouTube video.

Your aquascape is pretty tall and narrow, so everything is going to be pretty close to the light. I’d run it really low. Keep wattages of major reef lights like LED Kessil A360X (90 watts), Neptune Sky (200 watts), XR30 (215 watts). Best bet is to measure the par with a par meter like the seneye or a rental. I was having issues keeping things alive the first 6 months or so, was about to add more lighting, then got the seneye and realized I was torching everything.

If not mistaken they are running them at 100% whites and 100% blues while doing the PAR readings.... So yes according to the picture of you tank you're pretty close to the top.
 

EugeneVan

Active Member
View Badges
Joined
Feb 23, 2021
Messages
339
Reaction score
416
Location
Vancouver
Rating - 0%
0   0   0
Biggest mistake is too much intensity. I followed similar advise as above and it cooked my coral at 60 %. On a 210g tank 30 inches deep....These lights are strong. At 8" high like mine, I'm running 6% B and 1 % W. And I'm getting tons of growth. At 60 I had no growth at all, and a slow decline over the years. People make the same mistake with kessels and complain about no growth, lights were way to bright.
For Viparspectra LED users, I highly recommended you put on a DYI light panel diffuser on. It will get rid of the disco effect and make a huge different on how the light reach the tank.

 

diver22

Active Member
View Badges
Joined
Aug 9, 2016
Messages
275
Reaction score
99
Rating - 0%
0   0   0
For Viparspectra LED users, I highly recommended you put on a DYI light panel diffuser on. It will get rid of the disco effect and make a huge different on how the light reach the tank.

If you put this deffuser it will cut down the light significant, with this deffuser what are your settings ? would removing the lenses do the same thing ? and that will reduce it about 50% intensity.
 

EugeneVan

Active Member
View Badges
Joined
Feb 23, 2021
Messages
339
Reaction score
416
Location
Vancouver
Rating - 0%
0   0   0
If you put this deffuser it will cut down the light significant, with this deffuser what are your settings ? would removing the lenses do the same thing ? and that will reduce it about 50% intensity.
Before I put the diffuser on, my 210gal tank is using 30% blue and 3 % white and it still look too white. With the diffuser on and i didn't take out the lenses, I can increase the blue to 60% and 25% white over 2 months and half for the coral to adapt. All the different colors of LED blend in really well.
 
Back
Top