Newbie help please!

Steven9194

Active Member
View Badges
Joined
Dec 20, 2023
Messages
124
Reaction score
40
Location
shorewood
What state or country do you live in
Illinois
Rating - 0%
0   0   0
Hello!

I’ve had my tank running for about 7 months now. Numbers have been pretty stable for the last 3 months. I’ve tried adding a couple pieces of SPS (green/pink birdsnest), which both have died on me. Not exactly sure the reason, but I would love to be able to have some SPS in my system. Running 3 ReeFi Unos and attached my PAR layout as well. I started them around the bottom and slowly moved them up to around the 160-200 PAR range, prior to attaching them to the rock work.

The Nitrate/Phosphate numbers from today are a little higher then normal, as I tried to off an extra feeding over pellets recently, to see how it affected the tank. Typically Nitrates sit around 20 and PO4 is around .30 or so. I plan to start dropping the numbers back down tonight.

I would greatly appreciate any advice!

IMG_1877.png PAR.jpeg
 
How slow/fast are they dying? IMO sps will do better in 200+ par and alk at 8.5ish
 
How is your tank started? Dry Rock, live rock, something in between?
I started it with dry rock and live sand. Dosed ammonia and cycled. Then added clowns. Have dosed microbacter7 and a ton of pods.
 
Hello!

I’ve had my tank running for about 7 months now. Numbers have been pretty stable for the last 3 months. I’ve tried adding a couple pieces of SPS (green/pink birdsnest), which both have died on me. Not exactly sure the reason, but I would love to be able to have some SPS in my system. Running 3 ReeFi Unos and attached my PAR layout as well. I started them around the bottom and slowly moved them up to around the 160-200 PAR range, prior to attaching them to the rock work.

The Nitrate/Phosphate numbers from today are a little higher then normal, as I tried to off an extra feeding over pellets recently, to see how it affected the tank. Typically Nitrates sit around 20 and PO4 is around .30 or so. I plan to start dropping the numbers back down tonight.

I would greatly appreciate any advice!

IMG_1877.png PAR.jpeg
200 PAR would keep the easiest SPS like birds nest alive if the tank environment was good and stable. Probably would grow too, if a bit slowly. With phosphate at .5 I’d be very concerned in a tank as young as yours. In older well established tanks that wouldn’t be as much of an issue. It tells me that you may not have good enough nutrient export. What kind of water are you using? RODI is a minimum when you want to keep SPS. Might want to use dual DI canisters too. In my area my second canister is still turning brown even though water is coming out at 0 TDS from the first DI stage, so something is still getting through. Get that PO4 under control - naturally if possible and use very clean water and I’ll bet your problems will go away.
 
200 PAR would keep the easiest SPS like birds nest alive if the tank environment was good and stable. Probably would grow too, if a bit slowly. With phosphate at .5 I’d be very concerned in a tank as young as yours. In older well established tanks that wouldn’t be as much of an issue. It tells me that you may not have good enough nutrient export. What kind of water are you using? RODI is a minimum when you want to keep SPS. Might want to use dual DI canisters too. In my area my second canister is still turning brown even though water is coming out at 0 TDS from the first DI stage, so something is still getting through. Get that PO4 under control - naturally if possible and use very clean water and I’ll bet your problems will go away.
I have a 7 stage RODI filter. I think the numbers just got so high because I wasn’t testing as much. I also stopped changing the filter floss out so frequently. Was changing every 2-3 days, then turned into once a week.
 
Which picture is of your tank?
 

TOP 10 Trending Threads

WHEN BUYING EQUIPMENT YOUR REEF WILL DEPEND ON, WHAT MATTERS MOST TO YOU?

  • Long-term reports from other reefers

    Votes: 7 50.0%
  • My own past experience with the brand

    Votes: 2 14.3%
  • A simple design I can understand and maintain

    Votes: 1 7.1%
  • Warranty and responsive customer support

    Votes: 1 7.1%
  • Independent testing or detailed reviews

    Votes: 2 14.3%
  • Advice from an LFS or reefer I personally trust

    Votes: 0 0.0%
  • Being able to keep a spare or build in redundancy

    Votes: 1 7.1%
  • Something else? Tell us in the comments

    Votes: 0 0.0%
Back
Top
Home
Post thread…
Market
What's new