Return Pumps
Plumbing
I am using two hard plumbed Vectra M1s for my return pumps. The stock return lines have what appear to be union couplers on them, but I could not find a union collar that would connect to them, so I ended up cutting them off and replacing with standard 25mm unions.
Stock return line:
Stock union removed:
The outlet thread on the Vectra M1 is 25mm, but not every 25mm union will fit directly on to it (the thread size does not seem to be standardised for metric unions). After much trial and error, the unions that I found work are manufactured by Comer:
https://www.discountleisureproducts...25mm-grey-pvc-pressure-pipe-union-p2642/s3590
I used some red 25mm PVC pipe to make return lines for the pumps:
First pump connected:
Pump quick-disconnect cables
One thing that I found to be annoying on my last tank was that removing pumps for cleaning was more difficult than it needed to be because of cable management. In order to remove the pump from the sump I would have to pull out its cable from the various clips I had installed to keep it tidy. In order to avoid that issue on this build, I had the idea of putting a quick-disconnect connector at the pump end of the cable:
The connector sits above the waterline and is IP68 rates, so I was hopeful that it would be able withstand saltwater ingreess, but I only did this to one of the pumps as a test. It has been running for over six months now without issue, so I feel confident enough now to put a connector on the other pump. The connector that I used is an LD20 with 5 pins:
https://www.ebay.co.uk/itm/364224492839?hash=item54cd78b527:g:-e8AAOSwak1kP63h
The connector is installed by cutting the pump's cable and connecting the wires within the cable to the screw terminals on either side of the connector, making sure that the colours line up correctly when the two halves mate:
With these connectors, I will not have to remove the pump cables from the cable raceways I installed in the sump in order to take them out for cleaning, making the job much more straightforward: