Phosphates problem

  • Thread starter Thread starter Reefnewb
  • Start date Start date
  • Tagged users Tagged users None

Reefnewb

Active Member
View Badges
Joined
Apr 9, 2012
Messages
491
Reaction score
248
Location
Gilbertsville PA
What state or country do you live in
Maine
Rating - 0%
0   0   0
can anyone tell me why my phosphates keep going up and down? Last night I tested 3 times and they were 5ppb out of the GFO reactor 8ppb in the sump and 9ppb in display. I tested again this morning because I know I have a phosphate leaching problem and they were back up to 38ppb. Any help would be appreciated! These phosphates are holding me up from getting corals into this tank. Iv never had such an ongoing phosphate issue!
 
Could be test kit error. I can test three times in a row with Hanna and get three widely varying numbers.
 
can anyone tell me why my phosphates keep going up and down? Last night I tested 3 times and they were 5ppb out of the GFO reactor 8ppb in the sump and 9ppb in display. I tested again this morning because I know I have a phosphate leaching problem and they were back up to 38ppb. Any help would be appreciated! These phosphates are holding me up from getting corals into this tank. Iv never had such an ongoing phosphate issue!
I wouldn't let a little phosphate stop you from putting coral in the tank. I might check mine every 6 months. Last time I checked it was .25 or 80ppb.
 
+1

Hanna has a ±0.04 ppm (mg/L) or ±4% of reading. So if your values are within this window, I would add and average to give you a more accurate result.
 
can anyone tell me why my phosphates keep going up and down? Last night I tested 3 times and they were 5ppb out of the GFO reactor 8ppb in the sump and 9ppb in display. I tested again this morning because I know I have a phosphate leaching problem and they were back up to 38ppb. Any help would be appreciated! These phosphates are holding me up from getting corals into this tank. Iv never had such an ongoing phosphate issue!
Are you using a hanna tester?
This is anecdotal but I know little inconsistencies with water level and powder reagent makes a difference in the ppb reading.
For me it was a 10 to 15 point swing.

What is your hesitation in regards to phosphates?
 
can anyone tell me why my phosphates keep going up and down? Last night I tested 3 times and they were 5ppb out of the GFO reactor 8ppb in the sump and 9ppb in display. I tested again this morning because I know I have a phosphate leaching problem and they were back up to 38ppb. Any help would be appreciated! These phosphates are holding me up from getting corals into this tank. Iv never had such an ongoing phosphate issue!
https://www.google.com/url?sa=t&sou...7FJ2kchvLr_oHF3Bw&sig2=grKd8XHJKKyDDfgpPPBZRQ
 
Yes I am using the Hanna ULR checker these results have gone up and down for the past 3 months since I started the tank. I know phosphates are rediculouly high because about an hour after iv cleaned the glass the glass is dirty again.
 

TOP 10 Trending Threads

WHAT MOST OFTEN MAKES YOU REACH FOR YOUR CAMERA AROUND THE REEF?

  • Coral behavior (feeding, extension, or movement)

    Votes: 2 8.0%
  • New growth or a color change

    Votes: 3 12.0%
  • Unusual fish behavior

    Votes: 0 0.0%
  • The whole tank looking especially good

    Votes: 8 32.0%
  • Something I want to document in case it changes

    Votes: 2 8.0%
  • A funny or unexpected interaction

    Votes: 2 8.0%
  • I usually put the camera/phone down and just watch

    Votes: 4 16.0%
  • Other (Post in the comments)

    Votes: 4 16.0%
Back
Top
Home
Post thread…
Market
What's new