Plumbing

SanFernandoValleyAIOReef

Active Member
View Badges
Joined
Mar 8, 2023
Messages
414
Reaction score
131
Location
Los Angeles
What state or country do you live in
California
Rating - 0%
0   0   0
I can see why you want to control flow for return line (to match overflow and keep water level stable) I think but why use ball/gate on return line?
 
There are only a couple of reasons I can think of to put a ball valve on my return line.
  1. I chose a pump that is too big and the overflow can't handle the full flow.
  2. I have a manifold and may want to divert some of the pump's flow from the display equipment.
  3. I have an external pump and I want to be able to remove it with union ball valves.
For 90% of people, there is no reason to have a ball valve on your return line.
 
I have a gate on both my returns (2 aquariums) which helps control the flow, but isn’t totally necessary. An adjustable DC pump would basically do the same thing.
you definitely want a gate on the main drain, or things can get noisy
 
I have a gate on both my returns (2 aquariums) which helps control the flow, but isn’t totally necessary. An adjustable DC pump would basically do the same thing.
you definitely want a gate on the main drain, or things can get noisy

I have a gate on both my returns (2 aquariums) which helps control the flow, but isn’t totally necessary. An adjustable DC pump would basically do the same thing.
you definitely want a gate on the main drain, or things can get noisy

Sorry I meant on the drain, I know with dc pumps no valve needed for return , but I have a single durso drain , would I still need a gate/ball to make it quiet like the herbie & bean? Or does it keep itself quite and I can just adjust flow/water level with dc pump only
 
Sorry I meant on the drain, I know with dc pumps no valve needed for return , but I have a single durso drain , would I still need a gate/ball to make it quiet like the herbie & bean? Or does it keep itself quite and I can just adjust flow/water level with dc pump only
IMO you’re going to want a gate valve for fine tuning water level in the overflow rather than relying solely on the rate of a dc pump.
 
Sorry 1 more question, I have a single durso drain, still need gate?
All good, thats what the foruma for.
Yeah, I would want a gate if it was mine, the fine tuning you get vs a ball valve is really nice
 
It's not popular to put a restriction of any kind when dealing with a single drain. There is a lot of potential for blockage.

If you are going to do that make sure you have a good strainer on the drain intake.
 
It's not popular to put a restriction of any kind when dealing with a single drain. There is a lot of potential for blockage.

If you are going to do that make sure you have a good strainer on the drain intake.
Thanks, yes my first plan was to just put a egg crate on the hole of durso and checking every few weeks & changing the drain hose every 2-3 years
 

TOP 10 Trending Threads

WHAT DO YOU ALWAYS RUN OUT OF AT THE WORST TIME?

  • Salt mix

    Votes: 17 18.5%
  • Fish or coral food

    Votes: 5 5.4%
  • Test kits or reagents

    Votes: 10 10.9%
  • Filter media or replacement fleece

    Votes: 5 5.4%
  • RO/DI filters or supplies

    Votes: 14 15.2%
  • Fragging and repair supplies, like glue or epoxy

    Votes: 10 10.9%
  • I keep a backup of everything

    Votes: 24 26.1%
  • Other (Post in the comments)

    Votes: 7 7.6%
Back
Top
Home
Post thread…
Market
What's new