Power brick mounting ideas.

[brettonw]

Clearly I'm not a 3D printing master, but I'll try that out next time.

I ended up with a simpler design using a flat plate with a slot for some big zip ties. I'll use 2 per power supply, but probably won't use 4 screws for each one (overkill):

 

[brettonw]

This is the back of my control board, showing the clips I printed and how they are attached with 3/8" zip ties.

 

[Keko21]

the panel where the controllers are mounted is recessed so all the wires and bricks are behind there. 3M double sided tape or 3M Velcro adhesive worked fine.

 

[bldetwiller]

Those look great, but WOW on that price! I have several things I need to mount, so that price tag would add up pretty quick!

What about screwing sponge holders or napkin holders to your board? Plenty of ventilation for toasty power bricks and you can get them cheap at the dollar store!

https://www.dollartree.com/cooking-concepts-wire-napkin-holders/288726
This one is a 2-pack and has an adhesive back. https://www.walmart.com/ip/5087470483

 

[just reef]

Here's mine. Made it by welding aluminum, also acts as a heat sink.

Are you willing to make another one