To quote:
"PhosGuard does not directly alter alkalinity levels. However, you may notice an indirect connection between adding PhosGuard and KH. Phosphate itself acts as a buffer in water. Lowering the amount of phosphates in your tank will indirectly affect the alkalinity levels. Obviously, because PhosGuard works to remove phosphates, you may notice a slight drop in alkalinity initially."
I have never heard of it removing salts from the water
More ref reading
https://seachem.zendesk.com/hc/en-u...AQ-Can-I-use-Seachem-PhosGuard-together-with-
A tiny kernal of truth confounded by Seachem either not working this out, or just not bothering to provide exact numbers. The effect
is very small: a 1 ppm drop in phosphate only drops alk by 0.03 dKH. For most people, their phosphate decline is much smaller and the alk effect is not possibly detectable.
How much might alk drop from a 1 ppm phosphate decline?
Let's calculate...
total alkalinity is defined as:
TA = [HCO3–] + 2[CO3—] + [B(OH)4–] + [OH–] + [Si(OH)3O–] + [MgOH+] + [HPO4--] + 2[PO4---] – [H+]
https://reefs.com/magazine/chemistry-and-the-aquarium-what-is-alkalinity/
Thus, each PO4--- counts twice and each HPO4- counts once (H2PO4- does not count at all since it does nto get protonated in an alk titration).
How much is there?
1 ppm (1 mg/L) phosphate is 0.01 millimoles/L total phosphate
At pH 8.1, seawater contains 0.5% H2PO4–, 79% HPO4-- and 20% PO4---.
http://www.reefedition.com/phosphate-in-the-reef-aquarium-by-randy-holmes-farley/
Thus, we have
0.002 millimolar PO4---
0.008 millimilar HPO4--
In terms of alkalinity, we have
0.004 meq/L from the PO4--- since it is counted twice
0.008 meq/L from the HPO4-- since it is counted once
Thus, the alk from 1 ppm phosphate is 0.012 meq/L, or 0.03 dKH
Thus, a huge phosphate drop of 1 ppm will only drop alk by 0.03 dKH.