Radion owners with LPS corals - assemble!

  • Thread starter Thread starter DmitryB
  • Start date Start date
  • Tagged users Tagged users None

DmitryB

Valuable Member
View Badges
Joined
May 26, 2026
Messages
1,106
Reaction score
846
Location
Hunter, NY
What state or country do you live in
New York
Rating - 100%
1   0   0
I have an IM 40 gallon running (a 170 gallon will be set up later this summer) with a Radion XR 30 G6 Pro running on a mount. Will be getting a bunch of LPS and softie frags coming in a couple of days. What settings do you use on your tanks with it? The LPS preset or AB+? And what do you recommend for acclimation? (I am not in line with the full blue light, so would balance the cool white a bit or lower the Kelvin temp. Currently I have AB+ up but Kelvin lowered to 16K.
 
I run gen 5 15's ab+ @ 100% on my Ext 50 and IM15.
15
20251111_134712.jpg

Ext 50
20251214_133114.jpg
 
I have an IM 40 gallon running (a 170 gallon will be set up later this summer) with a Radion XR 30 G6 Pro running on a mount. Will be getting a bunch of LPS and softie frags coming in a couple of days. What settings do you use on your tanks with it? The LPS preset or AB+? And what do you recommend for acclimation? (I am not in line with the full blue light, so would balance the cool white a bit or lower the Kelvin temp. Currently I have AB+ up but Kelvin lowered to 16K.
Compared to me that is a lot of light over a 40 breeder.
I had a IM 75 before my current IM 170. On the 75 I had two Radion XR 15 G6 pros. On my 170 I have 3 of the Radion XR 15 G6 pros. Everything seems happy.

My tanks are LPS and softies with a few SPS. Mine are set at 75% for 8 hours with a ramp up and down for two hours in the AM and 2 hours in the PM.
IMG_2996.png
IMG_3001.png IMG_3002.png
 
Last edited:
I have an IM 40 gallon running (a 170 gallon will be set up later this summer) with a Radion XR 30 G6 Pro running on a mount. Will be getting a bunch of LPS and softie frags coming in a couple of days. What settings do you use on your tanks with it? The LPS preset or AB+? And what do you recommend for acclimation? (I am not in line with the full blue light, so would balance the cool white a bit or lower the Kelvin temp. Currently I have AB+ up but Kelvin lowered to 16K.
Compared to me that is a lot of light over a 40 breeder.
I had a IM 75 before my current IM 170. On the 75 I had two Radion XR 15 G6 pros. On my 170 I have 3 of the Radion XR 15 G6 pros. Everything seems happy.

My tanks are LPS and softies with a few SPS. Mine are set at 75% for 8 hours with a ramp up and down for two hours in the AM and 2 hours in the PM.
IMG_2996.png
IMG_3001.png IMG_3002.png
Yeah it's definitely a lot of light for the 40. I was initially looking at the 15, but someone on here urged me to go bigger. So I did. 😂 I guess I should not be running it at 100%! Of course to acclimate I'd have to start low anyway.

What do you think about this schedule:
- 25% for the first two weeks.
- 30% weeks three+four

And increase by 5% every two weeks and see how the corals react. Or is 2 weeks too long? Not enough?

Also, to decrease some of the blue from the AB+ preset, I can either lower the Kelvin temp or increase the cool white light. I'm sure those are not the same thing even if they achieve a similar visual outlook. Changing the Kelvin number adjusts every color proportionately. I don't know if that's better than just raising the cool white a bit.
 
I have 3 Gen 6 XR30s over a Mariner M180. I run AB+ at 60%. Only SPS I have are a Monti cap and a Stylo. Both are at the top of the rocks. All the LPS and and Softies are mid to bottom of the tank and all is looking good.
 
I don’t think the XR15 would have given you enough spread for that 36” width unless you would have raised it up 6-7 additional inches, so I do think the XR30 was a better choice, just a bit of overkill. 🤪

I don’t think you will ever need to run it at more than 30-35%. I believe a 40 breeder is only 16” deep, right. My guess is that will be plenty of par long term. I think it’s reasonable to start at 20% for a week or two and then go up by 5% for week 3-4, and by then you should have an idea of how things are going.

I’m thinking back to my 75 gallon, which was 36” long X 24” front to back X 20” deep, with essentially the same output as your 1 XR 30. If I recall, I think I was at 50%, and that tank was 4” deeper than a 40 breeder.

I don’t really know enough about the effect of increasing the white lights. I have my whites and blues at equal intensities. I thought I had heard that too much white could cause some algae issues.
 
They're both at 100%? And non-SPS's don't mind?
Yes but they are 15's not 30's. Big difference in power.
Leathers doing fine at 100% and around 250-300 par in the 15g.
20260617_142056.jpg
 
I use a pair of XR15's gen 5 over my 32" wide lps tank. I also have a pair of Reef Brite XHO blues.
They are at about 85%
 

TOP 10 Trending Threads

HOW MUCH DOES A FISH’S FEEDING REQUIREMENTS AFFECT YOUR STOCKING DECISIONS?

  • A lot! - I avoid fish that require frequent or specialized feeding

    Votes: 18 34.6%
  • Quite a bit, but an automatic feeder can change my answer

    Votes: 7 13.5%
  • It depends on whether my nutrient export can handle it

    Votes: 8 15.4%
  • It depends on how badly I want the fish

    Votes: 11 21.2%
  • Not much. I’m willing to adjust my routine

    Votes: 9 17.3%
  • Not at all. Feeding demands don’t limit my stocking choices

    Votes: 8 15.4%
  • I usually learn about the demanding feeding schedule after buying the fish!

    Votes: 2 3.8%
  • I haven’t really considered this before

    Votes: 4 7.7%
  • Something else (see my comments in the thread)

    Votes: 1 1.9%
Back
Top
Home
Post thread…
Market
What's new