Raising alkalinity by 2dkh

  • Thread starter Thread starter dsouth1103
  • Start date Start date
  • Tagged users Tagged users None

dsouth1103

Community Member
View Badges
Joined
Dec 5, 2017
Messages
72
Reaction score
15
Rating - 0%
0   0   0
Hey guys! I have a 50g lagoon and I just setup my Neptune Trident for ease of testing. My first test results came in and told me my Alk=6.02dkh Cal=410ppm and Mag=1296. First off, should I take this test result with a grain of salt considering it was test #1 right after calibration? Secondly, if this is a viable result how should I raise DKH with calcium in mind? I have Red Sea ALK buffer but if i raise DKH by 2 (not all at once) wouldn’t that have an inverse affect on calcium? If so, how much? I have been dosing 80ml of 1/2tsp/gallon BRS kalkwasser daily and obviously that is not enough to keep up with Alk but is enough for calcium, which I thought was strange because I thought kalk provided both proportionally. After getting the levels right should I increase saturation and maybe volume of doses? Sorry for all the questions at once but any help would be greatly appreciated!
 
First, how long does the tank run?
The reason I ask is that in young tanks just set up, alk consumption can be higher than calcium. Don't know exactly how that works, but has something to do with ammonia.

Second, I would never trust a new piece of equipment immediately.
Just let it run for a few weeks, then you know at least that it is working as intended. In the meantime do your maintenance as usual.
 
First, how long does the tank run?
The reason I ask is that in young tanks just set up, alk consumption can be higher than calcium. Don't know exactly how that works, but has something to do with ammonia.

Second, I would never trust a new piece of equipment immediately.
Just let it run for a few weeks, then you know at least that it is working as intended. In the meantime do your maintenance as usual.
Kind of hazy on the tanks “age”. I had a 30 gallon running for almost a year when I decided to transfer everything in it to the 50 gallon. Not sure how that impacts the tanks maturity but every drop of water and every ounce of rock/media was transferred over.
 
First don't do anything until you cross check that value with another test kit if not 3 different test kits until you know the trident enough to trust it.
I have Hanna checkers and two days prior to this Trident test it read 7.62dkh, i’ll test again today and react off the Hannas result. At the end of the day ALK is low but how much is the question.
 
I have Hanna checkers and two days prior to this Trident test it read 7.62dkh, i’ll test again today and react off the Hannas result. At the end of the day ALK is low but how much is the question.
If you know alk is off, raise it maybe a 0.5dkh. That won't effect anything.
Definitely check with other test kits.

Kalk is balanced. It may have been like this for some time. You can get it back in line with baking soda.

Let's just say your tank is a year old to keep it simple. ;)
 
So I just got home and checked again with the hanna checker and it says 7.28, I dosed up to 8. It’s strange having such wildly different answers. I have the same issue with PH, Hanna says 8.33 and Neptune Apex probe says 8.02. Hard to pick the one to trust.
 

TOP 10 Trending Threads

WHAT DO YOU ALWAYS RUN OUT OF AT THE WORST TIME?

  • Salt mix

    Votes: 17 18.9%
  • Fish or coral food

    Votes: 5 5.6%
  • Test kits or reagents

    Votes: 9 10.0%
  • Filter media or replacement fleece

    Votes: 5 5.6%
  • RO/DI filters or supplies

    Votes: 14 15.6%
  • Fragging and repair supplies, like glue or epoxy

    Votes: 10 11.1%
  • I keep a backup of everything

    Votes: 23 25.6%
  • Other (Post in the comments)

    Votes: 7 7.8%
Back
Top
Home
Post thread…
Market
What's new