Red Sea max skimmer

  • Thread starter Thread starter jlg
  • Start date Start date
  • Tagged users Tagged users None

jlg

New Member
View Badges
Joined
Dec 15, 2023
Messages
21
Reaction score
16
Location
Cumbria
What state or country do you live in
United Kingdom
Rating - 0%
0   0   0
Got a Red Sea max nanno with the supplied skimmer and up until a week ago it was running good but in the last week it’s just been filling the tank with micro bubbles and I can’t see why it’s still skimming and nothing has changed any advice
 
Have you checked whether you have any leaks anywhere? :-) Check that everything is properly put together, that tubes are connected where they should etc.
 
Have you checked whether you have any leaks anywhere? :) Check that everything is properly put together, that tubes are connected where they should etc.
Every thing is together properly first thing I checked but it’s a fairly basic basic internal skimmer
IMG_0129.jpeg
 
Every thing is together properly first thing I checked but it’s a fairly basic basic internal skimmer
I know - I run three of them ;) Are you sure that the bubbles come from your skimmer? Can you share a video?
 
I know - I run three of them ;) Are you sure that the bubbles come from your skimmer? Can you share a video?
Yes defo from the skimmer turned it off and they cleared away
 

Attachments

  • IMG_0127.jpeg
    IMG_0127.jpeg
    209 KB · Views: 93
Easy to see on a picture that something is wrong. Hard to see what it is..

Possible to share a video?

Micro bubbles like these don't come out of nowhere, there will be a leak somewhere i reckon. I know you checked it all over but it's still my best bet! :-) Could it be that the seal between the pump and the skimmer body isn't quite tight?
 
Easy to see on a picture that something is wrong. Hard to see what it is..

Possible to share a video?

Micro bubbles like these don't come out of nowhere, there will be a leak somewhere i reckon. I know you checked it all over but it's still my best bet! :) Could it be that the seal between the pump and the skimmer body isn't quite tight?
I’ll pull it back out and check only problem with it being powered from the box is you can’t power it separately to check it
 
I’ll pull it back out and check only problem with it being powered from the box is you can’t power it separately to check it
Stick it in a bucket of saltwater next to the tank, the cable should be long enough for that :-) It's a hassle, I know but worth a check!
 

TOP 10 Trending Threads

WHEN BUYING EQUIPMENT YOUR REEF WILL DEPEND ON, WHAT MATTERS MOST TO YOU?

  • Long-term reports from other reefers

    Votes: 2 40.0%
  • My own past experience with the brand

    Votes: 0 0.0%
  • A simple design I can understand and maintain

    Votes: 1 20.0%
  • Warranty and responsive customer support

    Votes: 1 20.0%
  • Independent testing or detailed reviews

    Votes: 1 20.0%
  • Advice from an LFS or reefer I personally trust

    Votes: 0 0.0%
  • Being able to keep a spare or build in redundancy

    Votes: 0 0.0%
  • Something else? Tell us in the comments

    Votes: 0 0.0%
Back
Top
Home
Post thread…
Market
What's new