• Thank you for visiting the R2R Marketplace! Please consider becoming a Supporting Member today! In addition to all the perks of becoming a supporting member, this notice will also be automatically removed! Click here for more details and Happy Reefing!

Red Sea Reefer XL525 Setup

redtigrinus

Active Member
View Badges
Joined
Oct 20, 2013
Messages
131
Reaction score
23
Location
MA
Rating - 0%
0   0   0
I'm down grading my tank and I curious to see what kind of interest there may be in my current system. I wouldn't move anything until my holding tank is setup which should be in the next couple weeks. At which point I'll clean the tank and it will be ready to go.

Here is what I will be looking to get sell

Red Sea Reefer XL525 - $2000 obro
Purchased Brand New. Been running for less than 6 months. All plumbing included. No scratches!

2 - Jecod CP40 Wavemaker Pumps - $80 each
One used for 3 months the other a couple weeks.

Jebao DCT8000 Return Pump - $60
Pump is about 18 month old. Used on my last tank. Hasn't missed a beat!

Aquamaxx Carbon Reactor - $50
Used for about 1 month.

Aquamaxx Biopellet Reactor XL - $100 orbo
Seen water but never actually used.

Kamoer Dosing pump with Containers - $275 orbo
Everything Brand New and still in the box!
http://www.saltysupply.com/equipment...ontainers.html

Tropic Marin Bio-Actif Salt - $30
Half a 200 gallon bucket.

Aqua UV Sterilizer 25 Watt 3/4" outlets - $150 obro
Hooked it up but never ran a drop of water through it!

I have over 100lbs of dry rock too (Pukani, Fiji, Marco). $1 per pound. I also have the live Marco rock in the tank, most of which I'll part with for the same $1 per pound.

PM me for pics.

Located in Springfield, MA

Thanks for looking.

20161016_145849_resized.jpg


20160907_214203_resized.jpg
 
OP
OP
R

redtigrinus

Active Member
View Badges
Joined
Oct 20, 2013
Messages
131
Reaction score
23
Location
MA
Rating - 0%
0   0   0
I posted on Bostonreefers.org. The Boston reefers page in R2R doesn't seem to get very much activity the last few times I've peaked over there.
 

Reefer1978

2500 Club Member
View Badges
Joined
Sep 22, 2014
Messages
4,136
Reaction score
3,641
Location
New Jersey
Rating - 100%
4   0   0
Haven't decide yet. I has been a bit of a project so if I did sell it, it would be with the understand that the light may not be perfect.

Ohh, I did not know that. I would be looking for something near perfect. :)
 
OP
OP
R

redtigrinus

Active Member
View Badges
Joined
Oct 20, 2013
Messages
131
Reaction score
23
Location
MA
Rating - 0%
0   0   0
Ohh, I did not know that. I would be looking for something near perfect. :)

I couldn't in good conscious sell it as a perfect light, because of the issues I have had with it. It will be in working order if and when I sell it, but I couldn't promise it would stay that way since this is the 3rd time it's failed me.

That's why I haven't listed it here. If I do sell it, it will be cheap.
 

Reefer1978

2500 Club Member
View Badges
Joined
Sep 22, 2014
Messages
4,136
Reaction score
3,641
Location
New Jersey
Rating - 100%
4   0   0
I couldn't in good conscious sell it as a perfect light, because of the issues I have had with it. It will be in working order if and when I sell it, but I couldn't promise it would stay that way since this is the 3rd time it's failed me.

That's why I haven't listed it here. If I do sell it, it will be cheap.

What's going on with it and which model is it?
 
OP
OP
R

redtigrinus

Active Member
View Badges
Joined
Oct 20, 2013
Messages
131
Reaction score
23
Location
MA
Rating - 0%
0   0   0
Its the Pacific Sun T5 Diuna 8x54 watt. It was damaged during shipping which cause the LCD screen toggle switch to break and the T5 relay channels to stick. I replaced both the relay and toggle and up until recently everything worked fine. The latest issue is with the mother board. It's not allowing the T5 channels to work at the same time. I just got the new part and will be replacing it soon. Once its repaired I'll decided whether or not to sell it, but I'll make sure the buyer understand that the light has not been without its flaws. When its working it works great, but when its not I wanna chuck the thing across the yard! There is no physical damage to the body of the light it was just the internal components.
 

Reefer1978

2500 Club Member
View Badges
Joined
Sep 22, 2014
Messages
4,136
Reaction score
3,641
Location
New Jersey
Rating - 100%
4   0   0
Its the Pacific Sun T5 Diuna 8x54 watt. It was damaged during shipping which cause the LCD screen toggle switch to break and the T5 relay channels to stick. I replaced both the relay and toggle and up until recently everything worked fine. The latest issue is with the mother board. It's not allowing the T5 channels to work at the same time. I just got the new part and will be replacing it soon. Once its repaired I'll decided whether or not to sell it, but I'll make sure the buyer understand that the light has not been without its flaws. When its working it works great, but when its not I wanna chuck the thing across the yard! There is no physical damage to the body of the light it was just the internal components.

Cool. Let me know when it's ready, at first I thought shipping damage is Physical damage to the unit. :)
 

TOP 10 Trending Threads

WHAT AMOUNT OF LIVE ROCK AND SAND SHOULD BE PRIORITIZED FOR OPTIMAL BIODIVERSITY/FILTRATION?

  • 100% live rock + bagged sand

    Votes: 38 26.6%
  • 100% dry rock + 100% live sand

    Votes: 48 33.6%
  • 50/50 live/dry rock, 50/50 live/bagged sand

    Votes: 32 22.4%
  • 75% live rock, 25% live sand

    Votes: 15 10.5%
  • 25% live rock, 75% live sand

    Votes: 10 7.0%
Back
Top