- Joined
- Aug 29, 2023
- Messages
- 121
- Reaction score
- 91
- Location
- Florida
- What state or country do you live in
- Florida
Hello,
Using the following set-up:
Reef Octopus Regal 200 INT: https://www.coralvue.com/regal-200int-protein-skimmer
Reef Octopus CO2 Scrubber: https://www.coralvue.com/reef-octopus-universal-co2-scrubber
Reef Octopus re-circulating scrubber lid: https://www.coralvue.com/reef-octopus-co2-scrubber-skimmer-lid
I have one line from the silencer connected to the Y-nozzle on the outlet of the scrubber. I have a second line getting delivered today to see if that will help.
Even when I have the pump on setting 2/5 (so very low), the water level in the skimmer slowly rises until it overflows. The water level drops back down as expected if I let more air into the skimmer. I can achieve this by unplugging the second hole on the silencer or opening the second piece of the Y-nozzle on the scrubber outlet.
Additionally, it seems like skimmate gets pulled through the lid and into the base of the scrubber.
Seeing as how I'm using all of the tubing and products from the same product line / company, I'm not sure why I'm having these issues. I'm using the exact set-up that they've built, but my skimmer fills up rapidly if left unmonitored for a few hours. I could leave the second opening on the Y-nozzle open, but then its bringing in outside air from the room my tank is in, which has ~1000ppm of CO2, which is why I need the scrubber anyways, so its defeating the purpose.
Using the following set-up:
Reef Octopus Regal 200 INT: https://www.coralvue.com/regal-200int-protein-skimmer
Reef Octopus CO2 Scrubber: https://www.coralvue.com/reef-octopus-universal-co2-scrubber
Reef Octopus re-circulating scrubber lid: https://www.coralvue.com/reef-octopus-co2-scrubber-skimmer-lid
I have one line from the silencer connected to the Y-nozzle on the outlet of the scrubber. I have a second line getting delivered today to see if that will help.
Even when I have the pump on setting 2/5 (so very low), the water level in the skimmer slowly rises until it overflows. The water level drops back down as expected if I let more air into the skimmer. I can achieve this by unplugging the second hole on the silencer or opening the second piece of the Y-nozzle on the scrubber outlet.
Additionally, it seems like skimmate gets pulled through the lid and into the base of the scrubber.
Seeing as how I'm using all of the tubing and products from the same product line / company, I'm not sure why I'm having these issues. I'm using the exact set-up that they've built, but my skimmer fills up rapidly if left unmonitored for a few hours. I could leave the second opening on the Y-nozzle open, but then its bringing in outside air from the room my tank is in, which has ~1000ppm of CO2, which is why I need the scrubber anyways, so its defeating the purpose.
