Does anyone happen to know the dimensions of the Barracuda impeller? I have a hybrid pump that has what I believe to be the Hammerhead impeller installed. That impeller looks to be about 4-7/8" diameter and the plate assembly (the part that slings the water) is about 1" wide. The other impeller is also 4-7/8" diameter, but is 5/8" wide. My understanding is that a Barracuda impeller is much smaller than either of these, but I don't have dimensions - can anyone help with that?
Reeflo Barracuda impeller dimensions
- Thread starter foxt
- Start date
- Tagged users None
rockworm
Active Member
I have the hammerhead/barracuda hybrid. I did not open the housing up to check the hammerhead size, but the barracuda impeller measures the same as yours. The older barracuda may have measured smaller than the hybrid.
I also have a dart/snapper hybrid and the diameter of the two are the same (smaller than the hammerhead/barracuda). However, the impeller thickness of the snapper is thinner than the dart.
I suspect the diameter of any hybrid has to be the same with the width determining the model. Hope this helps.
I also have a dart/snapper hybrid and the diameter of the two are the same (smaller than the hammerhead/barracuda). However, the impeller thickness of the snapper is thinner than the dart.
I suspect the diameter of any hybrid has to be the same with the width determining the model. Hope this helps.
Similar threads
- Price: $60-$900
- Shipping Available
- Price: $10-$600
- Shipping Available
