Revive/rejuvanate dry pH probes?

GalaxyBenny

Community Member
View Badges
Joined
Dec 4, 2021
Messages
69
Reaction score
54
Location
Wisconsin
Rating - 0%
0   0   0
The title more or less says it all. I picked up some used equipment and the pH probes were not stored wet. Some of them look new, but they don't appear to calibrate correctly. I did some research online and it claims you can sometimes rejuvenate a probe with alternative soaking in low pH (0.1-1M HCl)/high pH solutions (NaOH). If this works would CaOH work equally as well (also high pH and I have that on hand). Others also specifically mention soaking in potassium chloride (the typical storage solution?). I even saw one that recommended soaking in boiling nitric acid (in a fume hood of course) followed by soaking in hot filling solution.

It's likely all this isn't worth it, just buy some new probes. But before I throw away 3-4 otherwise perfectly good looking pH probes, I thought I would check with the experts.

@Randy Holmes-Farley - Any advice? Is it worth trying to fix them or just replace and stop worrying about it? Are there "quick" things you would try, and if those fail then toss them?

Thanks in advance for your advice.
 

Dan_P

5000 Club Member
View Badges
Joined
Sep 21, 2018
Messages
6,729
Reaction score
7,209
Rating - 0%
0   0   0
The title more or less says it all. I picked up some used equipment and the pH probes were not stored wet. Some of them look new, but they don't appear to calibrate correctly. I did some research online and it claims you can sometimes rejuvenate a probe with alternative soaking in low pH (0.1-1M HCl)/high pH solutions (NaOH). If this works would CaOH work equally as well (also high pH and I have that on hand). Others also specifically mention soaking in potassium chloride (the typical storage solution?). I even saw one that recommended soaking in boiling nitric acid (in a fume hood of course) followed by soaking in hot filling solution.

It's likely all this isn't worth it, just buy some new probes. But before I throw away 3-4 otherwise perfectly good looking pH probes, I thought I would check with the experts.

@Randy Holmes-Farley - Any advice? Is it worth trying to fix them or just replace and stop worrying about it? Are there "quick" things you would try, and if those fail then toss them?

Thanks in advance for your advice.
Unless the effort makes you feel good, toss the probes and move on to more exciting activities.
 

Going off the ledge: Would you be interested in a drop off aquarium?

  • I currently have a drop off style aquarium

    Votes: 0 0.0%
  • I don’t currently have a drop off style aquarium, but I have in the past.

    Votes: 1 1.2%
  • I haven’t had a drop off style aquarium, but I plan to in the future.

    Votes: 13 16.0%
  • I am interested in a drop off style aquarium, but have no plans to add one in the future.

    Votes: 31 38.3%
  • I am not interested in a drop off style aquarium.

    Votes: 33 40.7%
  • Other.

    Votes: 3 3.7%
Back
Top