Ro Di setup

[Purpule Tang]

Hi,guys.
I newly purchase one Ro di system for my tank.
I want using from my system for home & saltwater tank.
What's best diagram for setup and install it???
pls help and share your idea.
Thanks

 

[xREEFINaintEZx]

What did ya buy? Pictures will help.

 

[AZDesertRat]

This diagram shows you how to hook up a RO/DI so you can make DI water for your reef as well as have pressurized RO water for coking, icemaker and drinking. Pay close attention to the placement of the check valve between the RO pressure tank and the DI filter, this is very important if you want to get maximum life out of your DI resin.

http://spectrapure.com/huds/4-STAGE-DWK-RODI-NAG.pdf

This page has hook up diagrams for just about any type of set up you would ever want.

http://spectrapure.com/hookup-diagrams

 

[Purpule Tang]

This diagram shows you how to hook up a RO/DI so you can make DI water for your reef as well as have pressurized RO water for coking, icemaker and drinking. Pay close attention to the placement of the check valve between the RO pressure tank and the DI filter, this is very important if you want to get maximum life out of your DI resin.

http://spectrapure.com/huds/4-STAGE-DWK-RODI-NAG.pdf

This page has hook up diagrams for just about any type of set up you would ever want.

http://spectrapure.com/hookup-diagrams

Thanks Azdesertrat your pdf file very helping to me:)

 

[Purpule Tang]

Hi, friend.
I recently change my membrane to 100 gpd with 300 flow restrictor.
I after get about 40 liter water from this still my tds is 33ppm and don't low.
Also my tap water tds is 270 ppm.
What's problem? How can reduce this to beow 10ppm?
Pls if anyone know , help me.
Thanks,