Rubbermaid Sump 4" Filter Sock Holders

[jrhaughey]

No magnets!!

Fit great on the 100g Rubbermaid sump, see below.

These are made to fit on either the straight side, or there is the curve side version. 8mm thick so the will not break, the other problem I had with someone else's. Made from PETG, 50% fill, 4 walls thick for strength.

I current only have white on hand, but will be ordering black. If you want a specific color, just ask. These will be printed to order.

If anyone is looking for a 7" version, let me know and I should be able to work that up. Cost will be more.

Either version is $30 with USPS shipping in the continental US. Inquire for shipping to other locations.
Jason

 

[Pete Luna]

Only fits the 100?

 

[jrhaughey]

Only fits the 100?

Thats what I have to test it on. Thought about stopping by Tractor Supply to test fit on others.

 

[Pete Luna]

I us a 75 one one system and a 150 on another. Whats it made of?

 

[jrhaughey]

Made from PETG.
Based on Rubbermaid's website, it will fit the 50g & 100g for both the straight and curved sides. The straight version should fit the 150g and 300g stock tanks. It looks like they use the same curved lip on all the stock tanks. The 150g & 300g are wider and therefore have a different radius on the ends.

If you can get me the inside width and the overall width, I can adjust it to fit.

I did not see a 75g version. If the width of the tank is 30", the curved version should fit.

Hope that helps.

 

[jrhaughey]

Yes, these will fit the 150 gal tank. Tractor Supply did not have a 70g, but did have a 50g. It was loose on the 50g, but still works.

 

[biecacka]

Have a slightly larger on to handle 2 drains?

corey

 

[kchan1]

No magnets!!

Fit great on the 100g Rubbermaid sump, see below.

These are made to fit on either the straight side, or there is the curve side version. 8mm thick so the will not break, the other problem I had with someone else's. Made from PETG, 50% fill, 4 walls thick for strength.

I current only have white on hand, but will be ordering black. If you want a specific color, just ask. These will be printed to order.

If anyone is looking for a 7" version, let me know and I should be able to work that up. Cost will be more.

Either version is $30 with USPS shipping in the continental US. Inquire for shipping to other locations.
Jason

How to purchase this?