running dual Ecotech vectra pumps alternating

  • Thread starter Thread starter Salt Bank
  • Start date Start date
  • Tagged users Tagged users None

Salt Bank

Community Member
View Badges
Joined
Jan 29, 2018
Messages
29
Reaction score
27
Location
Indianapolis, Indiana
What state or country do you live in
Indiana
Rating - 0%
0   0   0
I have a 110Gal tank. I have a custom made inlet bottom and top of the tank. So I can change up the flow in the tank. I have been running these two lines off 1 pump. I just got 2 Ecotech L2 pumps. I have my lights and votechs and vectra all running on a reeflink. I also have a Neptune controller on the tank. I want to have the two pumps alternating thought the way. Aka top pump 4 hrs on the bottom pump 4hrs on. with a 30min ramp over. What would be the best way to do the programming on this?
 
Not sure if it is the same thing but I have a pair of 1" sea swirls each powered by their own Cor return pumps. One is a Cor 20 (furthest plumbing line) and the other is a Cor 15. I made a virtual outlet and named it tide.

OSC 000:00/360:00/360:00 Then ON

That will alternate 4 times a day and then I have the return pumps change power accordingly. Something like this:

/* Cor 20 */
Fallback ON
Set 80
If Output TideTiming = ON Then 25

or

/* Cor 15 */
Fallback OFF
Set 20
If Output TideTiming = ON Then 80

This alters left or right side having more power. Works ok. I also used the Apex wizard and ramped up one pump earlier and the other down. That worked but I was running into some sump height issues when the cross section of both pumps met at one point.
 
Your Sea swirls are a perfect example of what I am doing. since these are vectra on a reef link. I can use the apex to turn them on and off. I cant doing the ramp profiles. That I know off. I have a cor 20 in another tank. It's an ok pump runs a little off in my setup of a 40gal + sump.
 

TOP 10 Trending Threads

WHAT DO YOU ALWAYS RUN OUT OF AT THE WORST TIME?

  • Salt mix

    Votes: 17 18.9%
  • Fish or coral food

    Votes: 5 5.6%
  • Test kits or reagents

    Votes: 9 10.0%
  • Filter media or replacement fleece

    Votes: 5 5.6%
  • RO/DI filters or supplies

    Votes: 14 15.6%
  • Fragging and repair supplies, like glue or epoxy

    Votes: 10 11.1%
  • I keep a backup of everything

    Votes: 23 25.6%
  • Other (Post in the comments)

    Votes: 7 7.8%
Back
Top
Home
Post thread…
Market
What's new