Salinity Measurement when Mixing Salt Water

  • Thread starter Thread starter Jib
  • Start date Start date
  • Tagged users Tagged users None

Jib

Well-Known Member
View Badges
Joined
Aug 10, 2020
Messages
599
Reaction score
665
Location
Pennsylvania, USA
What state or country do you live in
Pennsylvania
Rating - 0%
0   0   0
Getting ready to start mixing my own salt water for the first time. Will be using Red Sea Blue Bucket. On the instructions, the last steps is to raise the water temp to 77 and check for desired salinity. The refractometer I have has "ATC" stamped on it, which I believe stands for Automatic Temperature Compensation. If it is compensating for temperature, do I really need to raise the water temp?

Thanks!
 
IME .. I use a Hanna salinity checker but have always used a refractometer for mixing salt . I have never heated water for this exact reason .
And in Almost 20 years have never had a issue
 
IME .. I use a Hanna salinity checker but have always used a refractometer for mixing salt . I have never heated water for this exact reason .
And in Almost 20 years have never had a issue

Kind of what I was thinking, thanks!
 
Getting ready to start mixing my own salt water for the first time. Will be using Red Sea Blue Bucket. On the instructions, the last steps is to raise the water temp to 77 and check for desired salinity. The refractometer I have has "ATC" stamped on it, which I believe stands for Automatic Temperature Compensation. If it is compensating for temperature, do I really need to raise the water temp?

Thanks!

No, you do not.
 
I also do not believe that a mechanical ATC refractometer needs to be calibrated at any specific temperature. Calibration at any temperature in the ATC specified range must give the same result as long as the ATC works properly.

But for reasons that I have never understood, many such refractometers specify an exact temp for calibration. I think it likely they just do not understand their own device, or just copied the procedure from another company that did not understand the principles.
 
I also do not believe that a mechanical ATC refractometer needs to be calibrated at any specific temperature. Calibration at any temperature in the ATC specified range must give the same result as long as the ATC works properly.

But for reasons that I have never understood, many such refractometers specify an exact temp for calibration. I think it likely they just do not understand their own device, or just copied the procedure from another company that did not understand the principles.

Very interesting, I appreciate the context!
 

TOP 10 Trending Threads

WHAT DO YOU ALWAYS RUN OUT OF AT THE WORST TIME?

  • Salt mix

    Votes: 17 18.5%
  • Fish or coral food

    Votes: 5 5.4%
  • Test kits or reagents

    Votes: 10 10.9%
  • Filter media or replacement fleece

    Votes: 5 5.4%
  • RO/DI filters or supplies

    Votes: 14 15.2%
  • Fragging and repair supplies, like glue or epoxy

    Votes: 10 10.9%
  • I keep a backup of everything

    Votes: 24 26.1%
  • Other (Post in the comments)

    Votes: 7 7.6%
Back
Top
Home
Post thread…
Market
What's new