Schnitzel's SPS

It is interesting to see what these guys look like once they been in captivity for a while. Beautiful colors though
 
My calcium reactor was running low on media, so I tore it apart and added new media. I used to use Caribsea and Neomag, but I decided to switch to TLF Reborn and Remag. The media lasted about 1.5 years.






 
Back to full! Very nice. Any reason for the switch? Or just trying something new?
 
I have the same Ca reactor on my 200 gallon. Did you switch out the pump? Didn't it come with a pan world pump? Why the switch? Im curious to know what you set your ph for the reactor at and the drip rate? Thanks.
 
I have the same Ca reactor on my 200 gallon. Did you switch out the pump? Didn't it come with a pan world pump? Why the switch? Im curious to know what you set your ph for the reactor at and the drip rate? Thanks.

Yep, I swapped the panworld out for a Sicce 1.5. The panworld was noisy and hot. Very easy swap.

I run my ph at 6.5-6.6. My flow rate is wide open. I don't even use the micro gate valve anymore.
 
Media looks chunky!
 
Yep, I swapped the panworld out for a Sicce 1.5. The panworld was noisy and hot. Very easy swap.

I run my ph at 6.5-6.6. My flow rate is wide open. I don't even use the micro gate valve anymore.

Well I may attempt a pump swap at a later date.

So is your alk stable running wide open? What is your alk level maintained at under those settings? You have a lot of sps so I would imagine its not running at a high level because its consumed by your sps.

I have my pH set between 6.9-7, the pinpoint controller is not as precise as say, an apex controller. These settings keeps my Alk at 9. However, I just started and have little dinky frags. I run my valve borderline wide open (almost dripping at end of stream). I should have more frags in the tank in a few weeks. :)
 
Tank looks amazing! Love the photos as well.

How high are your T5's right now and what is your lighting schedule + % you are running?
 
Well I may attempt a pump swap at a later date.

So is your alk stable running wide open? What is your alk level maintained at under those settings? You have a lot of sps so I would imagine its not running at a high level because its consumed by your sps.

I have my pH set between 6.9-7, the pinpoint controller is not as precise as say, an apex controller. These settings keeps my Alk at 9. However, I just started and have little dinky frags. I run my valve borderline wide open (almost dripping at end of stream). I should have more frags in the tank in a few weeks. :)

My alk stays between 7 and 8, and yes it's very stable.

You won't regret changing the pump to a sicce.

Tank looks amazing! Love the photos as well.

How high are your T5's right now and what is your lighting schedule + % you are running?

Lights are 11" off the water. And I run the T5s at 100%. My T5s are on about 10 hours a day. My Reefbrites are on 13 hours.
 
My alk stays between 7 and 8, and yes it's very stable.

You won't regret changing the pump to a sicce.



Lights are 11" off the water. And I run the T5s at 100%. My T5s are on about 10 hours a day. My Reefbrites are on 13 hours.


Perfect, thanks :) Having some SPS issues these days where everything else is going strong. Just wanted to grab some info.
 
Man you are killing it beautiful acros! I didn't go back and I look do you have a recent pic of the entire tank?
 
One of the best! Looks great man
 
Awesome! That was also some great camera work adjusting for the lighting. It helped bring the colors into focus. I enjoy seeing the old video posted for comparison.
It is always inspiring to visit your thread.
 

TOP 10 Trending Threads

Back
Top
Home
Post thread…
Market
What's new