:( just tore down my display tank, but i currently have everything in a 48x24x12 frag setup i recently set up while my new tank project gets underway.
The frag tank, is roughly 60 gallons, 2 standpipe overflows, to a 45 gallon sump w/ refugium. Running an Octopus DNW-200 skimmer, overkill, but thats kinda my style. Phosban reactor, Tunze Osomolator, and 18 watt UV steralizer.
Lighting is 2 250w HQI 14k pheonix bulbs in reef optix III reflectors.
Circulation is done through 4 3/4 open returns powered by a MAG24 (dialed down a bit), no additional flow is needed anymore. Each are adjustable via output direction and flow by ball valves.
Currently in a temp spot, using cement blocks with a platform you could park a car on (2x6's and 3/4 plywood)
Here is a pic without some of the returns, one light still not up, and NO cord management :rolleyes:
Soon (i hope) to add reefkeeper Elite controller when it is released.
My new tank build is going to be 72 x 30 or 36 x 24 or 26, built in wall, all tied into grow out tank, much larger sump, and should be in the area of 400-500 gallons total water volume.
Like i said this pic was taken while it was still a work-in-progress