Spears PVC 1" Gate Valve 3d File

[thamnasteroid]

Can someone 3d model a Spears PVC 1" gate valve for me please? The specific model is 2012-010 Thanks.

 

[thamnasteroid]

I would like the 3d file to be an STL or OBJ file.

 

[SteveMM62Reef]

Why don’t you go right to their web site and lift it off in the format you want? https://parts.spearsmfg.com/ProductReport.aspx?prdid=13039

 

[thamnasteroid]

Why don’t you go right to their web site and lift it off in the format you want? https://parts.spearsmfg.com/ProductReport.aspx?prdid=13039

They don't have all the dimensions that I would need in order to 3d model one.

 

[SteveMM62Reef]

Also you can check McMaster-Carr.

 

[thamnasteroid]

Why don’t you go right to their web site and lift it off in the format you want? https://parts.spearsmfg.com/ProductReport.aspx?prdid=13039

Also what do you mean by “lift it off”?

 

[SteveMM62Reef]

You take a Screenshot of it, from the site or you down load it onto your computer or iPad and take a Screenshot. I just realized the OP Maybe trying to 3D Print the valve. This is highly illegal, and violates copyright laws. I don’t know why someone would want to do this anyway, as the valves are cheap and if not locally available, can be delivered to your door in a few days.

 

[thamnasteroid]

You take a Screenshot of it, from the site or you down load it onto your computer or iPad and take a Screenshot. I just realized the OP Maybe trying to 3D Print the valve. This is highly illegal, and violates copyright laws. I don’t know why someone would want to do this anyway, as the valves are cheap and if not locally available, can be delivered to your door in a few days.

I am actually not trying to 3d print the valve, I am using a cad program to design a tank system.

 

[SteveMM62Reef]

Then you should be able to get the Cad Drawings off the sites I listed, in the way I described. I used to this all the time, to get around the PDF. Before they had easily PDF File converters. The last job I was on, they were too cheap to buy me a CAD Program. I would take the Drawings of different HVAC Controls, show how the components were wired together, and write instructions on how everything worked. Also how to calibrate and trouble shoot the controls.