Specific gravity

larrysaltisfun

Well-Known Member
View Badges
Joined
Apr 5, 2025
Messages
830
Reaction score
499
Location
outer banks NC
Rating - 0%
0   0   0
So I just discovered that the specific gravity of my tank is 1.027 and the water I’ve been getting from my LFS which I thought was 1.024 is really at 1.028. my leather coral and cespitularia have been looking kind of peaked lately slumped over.
LPS and Zoas look good .

Two questions: can I safely bring the specific gravity down to 1.026 with one 10% water change without adversely, affecting corals and

do you think this could have caused the sudden irritation in my softies?
 
I do not believe this is what caused irritation to your corals. IMO a swing of .001 will not impact a coral THAT greatly (I could be wrong, I've been wrong before) I would investigate other issues, softies can be dramatic.
 
So I just discovered that the specific gravity of my tank is 1.027 and the water I’ve been getting from my LFS which I thought was 1.024 is really at 1.028. my leather coral and cespitularia have been looking kind of peaked lately slumped over.
LPS and Zoas look good .

Two questions: can I safely bring the specific gravity down to 1.026 with one 10% water change without adversely, affecting corals and

do you think this could have caused the sudden irritation in my softies?
I think you’re asking can you safely bring in down from 1.026 from .027 in one shot? IMO yes. I’ve done it with SPS in the tank with no ill effects. Slower the better though.
Can you do it with a 10% WC, will depend on the size of tank.
I’ve had ATO issues in the past where I’d see shifts of .01 in my smaller tank. Nothing died.
 
So I just discovered that the specific gravity of my tank is 1.027 and the water I’ve been getting from my LFS which I thought was 1.024 is really at 1.028. my leather coral and cespitularia have been looking kind of peaked lately slumped over.
LPS and Zoas look good .

Two questions: can I safely bring the specific gravity down to 1.026 with one 10% water change without adversely, affecting corals and

do you think this could have caused the sudden irritation in my softies?
I think you’re asking can you safely bring in down from 1.026 from .027 in one shot, IMO yes. I’ve done it with SPS in the tank with no ill effects. Slower the better though.
Can you do it with a 10% WC, will depend on the size of tank.
I’ve had ATO issues in the past where I’d see shifts of .01 in my smaller tank. Nothing died.
Yes, that’s exactly what I was asking. I could do it with a 10% water change. I just wanted to make sure that doing it in one fell swoop would be safe thank you.
 
I do not believe this is what caused irritation to your corals. IMO a swing of .001 will not impact a coral THAT greatly (I could be wrong, I've been wrong before) I would investigate other issues, softies can be dramatic.
Yeah, the leather coral is huge relative to the size of everything else. I have a feeling it polluted my water when I moved it, and that might have caused the irritation to my other softies.
 
Yeah, the leather coral is huge relative to the size of everything else. I have a feeling it polluted my water when I moved it, and that might have caused the irritation to my other softies.
Could be! Or if something brushed up against the other corals etc. I did an algae clean on a tank and my Kenya trees decided they where going to be emo for several days.
 
So I just discovered that the specific gravity of my tank is 1.027 and the water I’ve been getting from my LFS which I thought was 1.024 is really at 1.028. my leather coral and cespitularia have been looking kind of peaked lately slumped over.
LPS and Zoas look good .

Two questions: can I safely bring the specific gravity down to 1.026 with one 10% water change without adversely, affecting corals and

do you think this could have caused the sudden irritation in my softies?

An accurate sg of 1.027 is fine. I’d lower it slowly if you want it lower. There is no urgency.
 
So I just discovered that the specific gravity of my tank is 1.027 and the water I’ve been getting from my LFS which I thought was 1.024 is really at 1.028. my leather coral and cespitularia have been looking kind of peaked lately slumped over.
LPS and Zoas look good .

Two questions: can I safely bring the specific gravity down to 1.026 with one 10% water change without adversely, affecting corals and

do you think this could have caused the sudden irritation in my softies?

An accurate sg of 1.027 is fine. I’d lower it slowly if you want it lower. There is no urgency.
Thank you, Randy
 
Personally I would slowly remove a cup of saltwater and replace with rodi until you get to where you want to be. I would not say this is why only 2 corals are upset, to me its not a big deal.
This.

Way easier than mixing a WC at 1.025 and hoping you land at .026.
 
Im with Mr. Mojo as well.

From .027 to .026 is super easy simply by taking out the saltwater ( X amount ) and let the ATO refill with RO.
No need for a WC.

Give it say.. an hour then take a reading
 
Remove 3.7% to be replaced with RODI is what it would take to reduce S.G, from 1.027 to 1.026
 

TOP 10 Trending Threads

WHAT MOST EARNS A REEFING BUSINESS YOUR "BEST OF THE BEST" NOMINATION?

  • Excellent livestock or product quality

    Votes: 2 10.0%
  • Honest listings and accurate expectations

    Votes: 2 10.0%
  • Helpful, knowledgeable customer service

    Votes: 1 5.0%
  • Standing behind a product when something goes wrong

    Votes: 6 30.0%
  • Fair prices and good value

    Votes: 4 20.0%
  • A unique selection or innovative products

    Votes: 0 0.0%
  • Supporting the reefing community or sustainability

    Votes: 0 0.0%
  • Consistent quality over time

    Votes: 4 20.0%
  • Other (Post in the comments)

    Votes: 1 5.0%
Back
Top
Home
Post thread…
Market
What's new