jaxteller007
Valuable Member
- Joined
- Mar 27, 2018
- Messages
- 1,387
- Reaction score
- 763
I'm looking to do a sump now that we've moved out of an apartment and into a house. It will have to be an in cabinet setup since we don't have a basement or anywhere i can put one and run lines to the tank. I was talking to someone from bulk reef supply and this is what the recommended (I'm sure they were pushing me to the higher end stuff but that's why I'm asking you all).
Trigger systems rub 30 (what's the difference between the ruby and the crystal besides price?)
Syncra silent 4.0
CPR Aquatics deluxe CS102
Here are the measurements of our available space and pics of the cabinet. And I'm completely fine with losing the shelf to put a sump in.
From lip edge to divider in the middle is 15" on each side. From bottom lip to top lip is 21"
Inside the cabinet.
Shelf to top (bottom of tank) is 20"
Remove shelf and it's 27" from the bottom to the top
From side to side it's 47"
Front to back is 16"
Right now the wall to the tank edge is 5.5". We could extend that out to 7.5" without it being out in the living room too far.
Trigger systems rub 30 (what's the difference between the ruby and the crystal besides price?)
Syncra silent 4.0
CPR Aquatics deluxe CS102
Here are the measurements of our available space and pics of the cabinet. And I'm completely fine with losing the shelf to put a sump in.
From lip edge to divider in the middle is 15" on each side. From bottom lip to top lip is 21"
Inside the cabinet.
Shelf to top (bottom of tank) is 20"
Remove shelf and it's 27" from the bottom to the top
From side to side it's 47"
Front to back is 16"
Right now the wall to the tank edge is 5.5". We could extend that out to 7.5" without it being out in the living room too far.
